Microlife 3AC1-PC Blood Pressure Monitor User Manual

The Microlife 3AC1-PC is an upper arm blood pressure monitor with advanced features for accurate home measurement. It features clinically validated accuracy, irregular heartbeat detection, MAM (Microlife Average Mode) technology for reliable average values, a large memory for multiple users, PC connectivity for data management, a clear LCD display with backlight, and a comfortable D-ring cuff. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Upper Arm Cuff with D-ring, AC Adapter, USB Cable, Software CD, Instruction Manual.

Safety Information

Read all instructions before use. For home use only.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult your physician before use if you have arrhythmia, arterial sclerosis, or other circulatory disorders.
3. Do not use during or immediately after physical exercise, bathing, eating, or drinking alcohol/caffeine.
4. Do not use on an injured or IV arm.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

Package Contents

Unpack and verify all items are present.

• Microlife 3AC1-PC Monitor (1 unit)
• Upper Arm Cuff with D-ring (22-42 cm) (1 unit)
• AC Adapter (1 unit)
• USB Cable (1 unit)
• Software CD (1 disc)
• Instruction Manual (this booklet)
• Quick Start Guide (1 sheet)

CAUTION! Do not use if any item is damaged. Contact customer service.

Device Overview

Front Panel: LCD Display, START/STOP Button, MEMORY Button, USER Button, SET Button. Side: USB Port, AC Adapter Socket. Cuff: Air Tube Connector, D-ring, Velcro closure, artery marker.

Display Symbols: User Icon (U1/U2), Memory Icon, Battery Icon, MAM Icon, Irregular Heartbeat Symbol, WHO Indicator Bar, Systolic/Diastolic/Pulse values, Date/Time.

Initial Setup

Before first use: Install batteries or connect AC adapter, set date/time, select user.

1. Power: Insert 4 AA batteries or connect AC adapter to socket and wall outlet.
2. Set Date/Time: Press SET button, use START/STOP to adjust values, press SET to confirm.
3. Select User: Press USER button to choose U1 or U2. The user icon will appear on display.
4. Cuff Application: Place cuff on bare upper arm, align artery marker with brachial artery, secure with D-ring.

Tip: For most accurate results, rest for 5 minutes before measuring. Sit comfortably with feet flat on floor.

Taking a Measurement

Supports Standard single measurement and MAM (3-in-1) mode.

1. Prepare: Sit quietly for 5 minutes. Apply cuff correctly to left arm at heart level.
2. Start: Press START/STOP button. Cuff will inflate automatically.
3. During Measurement: Remain still and quiet. Do not move arm or talk.
4. Result: Cuff deflates. Systolic, diastolic pressure, and pulse rate display. WHO bar indicates category.
5. MAM Mode: Press and hold START/STOP for 3 seconds until MAM icon appears. Device takes 3 readings with 30-second pauses and displays the average.
6. Power Off: Device turns off automatically after 1 minute.

WARNING! Do not inflate cuff over 299 mmHg. If discomfort occurs, press START/STOP to stop.

Memory & Data Management

Stores 99 readings for each of 2 users (U1/U2).

1. View Memory: Press MEMORY button to scroll through stored readings for current user.
2. Switch User: Press USER button to select U1 or U2, then press MEMORY to view their data.
3. Delete All Memory: With device off, press and hold MEMORY and SET buttons simultaneously for 3 seconds. "CLr" appears. Confirm by pressing START/STOP.
4. Date/Time Stamp: Each reading is stored with date and time of measurement.

PC Connectivity

Transfer data to computer for tracking and analysis using included software.

1. Install Software: Insert CD, follow on-screen instructions to install "Microlife Health Management Software".
2. Connect Device: Use USB cable to connect monitor to computer USB port.
3. Transfer Data: Open software, follow prompts to download memory data.
4. View Reports: Software displays graphs, trends, and printable reports.

Note: Software compatible with Windows 7/8/10. Mac OS not supported.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning.

• Monitor: Wipe with soft, slightly damp cloth. Do not immerse in water.
• Cuff: Can be hand-washed in mild soapy water. Air dry completely before use. Do not machine wash, dry clean, or iron.
• Storage: Store in cool, dry place. Avoid extreme temperatures, humidity, and direct sunlight.
• Batteries: Replace when low battery icon appears. Use alkaline batteries. Remove if not used for extended periods.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble the device.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (upper arm circumference)
• Memory: 99 readings x 2 users
• Power Supply: 4 x 1.5V AA batteries or 6V DC AC adapter
• Display: LCD with backlight
• Interface: USB 2.0
• Operating Conditions: 10°C to 40°C, 15% to 90% RH (non-condensing)
• Dimensions: Approx. 128mm (W) x 105mm (H) x 67mm (D)
• Weight: Approx. 300g (without batteries)

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute, then reinsert.

Service: For technical support, visit www.microlife.com or contact your local Microlife service center. Do not attempt to repair the device yourself.