Microlife AFIB ADVANCED Easy Blood Pressure Monitor User Manual

The Microlife AFIB ADVANCED Easy Blood Pressure Monitor is a clinically validated, automatic upper-arm device designed for home use. It features patented AFIB (Atrial Fibrillation) detection technology, one-touch operation with automatic inflation, a large backlit display, irregular heartbeat detection, two-user memory with date/time stamp, risk category indicator, and average value calculation. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Device Overview 5. Initial Setup 6. Taking a Measurement 7. Understanding Results 8. Memory Function 9. Care & Maintenance 10. Technical Specifications 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, Easy-Wrap cuff, 4x AA batteries, storage case, and instruction manual.

Feature	Description
AFIB Detection	Patented technology to screen for possible atrial fibrillation during measurement
One-Touch Operation	Fully automatic inflation and deflation with single START/STOP button
Large Backlit Display	Easy-to-read LCD with clear icons and values
Two-User Memory	Stores up to 99 measurements per user with date and time
Irregular Heartbeat Detection	Detects and displays irregular heartbeat pulses during measurement
Risk Category Indicator	Color-coded bar graph based on WHO hypertension classification
Average Value Calculation	Displays average of last 3 measurements taken within 10 minutes
Automatic Power-Off	Conserves battery life by turning off after 1 minute of inactivity
Body Movement Detection	Alerts user if movement is detected during measurement
Cuff Fit Indicator	Verifies proper cuff placement before measurement

Safety Information

Read all instructions before use. Consult your physician for interpretation of readings.

Do not use on infants, young children, or persons unable to express themselves.
Do not use if you have an arrhythmia (except atrial fibrillation), pre-eclampsia, or arteriovenous shunt.
Do not inflate cuff when not wrapped around arm.
Use only specified components; do not modify device.
Keep away from strong electromagnetic fields (MRI, mobile phones).

WARNING! This device is for home use only, not for continuous monitoring or medical diagnosis. Measurements may be affected by movement, talking, or recent exercise.

Package Contents

Microlife AFIB ADVANCED Monitor: 1 unit
Easy-Wrap Cuff (22-42 cm): 1 piece
AA Batteries: 4 pieces
Storage Case: 1 piece
User Manual: 1 copy
Quick Start Guide: 1 copy

CAUTION! Check all contents upon unboxing. Do not use if any item is damaged or missing.

Device Overview

Front Panel: Large LCD display, START/STOP button, MEMORY button, USER button (1/2), DATE/TIME SET button.

Display Icons: Systolic/Diastolic pressure, Pulse rate, AFIB symbol, Irregular heartbeat symbol, User indicator, Battery level, Risk category bar, Memory recall, Average value, Cuff error, Movement warning.

Connections: Cuff tube port (left side), Battery compartment (rear).

Initial Setup

Power on device; set date and time for accurate memory records.

Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set Date/Time: Press and hold DATE/TIME button, use START/STOP to adjust values.
Select User: Press USER button to select User 1 or User 2 for separate memory.
Apply Cuff: Place cuff on bare left arm 1-2 cm above elbow, align artery marker with brachial artery.
Cuff Fit Test: Device automatically checks cuff fit; OK symbol appears if correct.

Tip: Rest for 5 minutes before first measurement. Sit comfortably with feet flat, back supported.

Taking a Measurement

Follow proper procedure for accurate results.

Sit quietly for 5 minutes in a chair with back support.
Place cuff on left arm as described, ensure tube runs down center of arm.
Rest arm on table with cuff at heart level, palm up.
Press START/STOP button; cuff inflates automatically.
Remain still and quiet during measurement.
Results display with systolic, diastolic, pulse rate, and any detection symbols.
Device deflates fully; press START/STOP to turn off or wait for auto power-off.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accurate reading.

Understanding Results

Display shows systolic pressure (top), diastolic pressure (middle), pulse rate (bottom).

Symbol	Meaning	Action
AFIB	Possible atrial fibrillation detected	Consult physician; may require ECG confirmation
Irregular Heartbeat	Occasional irregular pulse detected	Note occurrence; repeat measurement
Risk Bar (Green/Yellow/Red)	WHO hypertension classification	Green=Normal, Yellow=Elevated, Red=High – discuss with doctor
Movement Symbol	Excessive movement detected	Repeat measurement while keeping still
Cuff Error	Improper cuff placement or leakage	Reapply cuff, ensure secure fit

Note: AFIB detection sensitivity >95%. For medical diagnosis, consult healthcare professional.

Memory Function

Stores 99 measurements per user with date/time stamp.

Recall Memory: Press MEMORY button to scroll through stored readings.
View Average: Display shows average of last 3 measurements taken within 10 minutes.
Clear Memory: Hold MEMORY button for 5 seconds to clear current user's memory.
Switch Users: Press USER button to toggle between User 1 and User 2 memory.

Tip: Record readings in a log book for physician review during appointments.

Care & Maintenance

Clean device with soft, dry cloth only. Do not immerse in water or use chemicals.

Remove batteries if not using for extended period.
Store in provided case in cool, dry place away from direct sunlight.
Clean cuff with damp cloth if soiled; do not machine wash.
Replace batteries when low battery symbol appears.
Avoid extreme temperatures (below 5°C or above 40°C).

CAUTION! Do not disassemble device. No user-serviceable parts inside.

Technical Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
Inflation: Automatic, up to 200 mmHg
Memory: 99 measurements x 2 users
Power Supply: 4 x 1.5V AA batteries or DC 6V adapter (optional)
Battery Life: Approx. 500 measurements (alkaline batteries)
Operating Conditions: 10°C to 40°C, 15-85% RH
Cuff Size: 22-42 cm (arm circumference)
Dimensions: 128 x 102 x 62 mm (main unit)
Weight: Approx. 350g (without batteries)

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries with new ones
Error E1	Cuff not properly attached	Reconnect cuff tube securely to device
Error E2	Cuff pressure error	Check cuff for leaks or damage; replace if necessary
Error E3	Measurement error	Ensure proper cuff placement; remain still during measurement
Inconsistent readings	Movement or improper position	Rest 5 minutes, ensure arm at heart level, repeat measurement
AFIB symbol appears frequently	Possible arrhythmia	Consult physician for clinical evaluation
Device turns off during use	Low batteries	Replace batteries immediately
No memory recall	Memory cleared or no data	Take new measurements; memory stores only when device powers off normally

Reset: Remove batteries for 5 minutes to reset device.

Service: For technical support, contact Microlife customer service or authorized service center. Do not attempt to repair yourself.