Microlife Aponorm 06575428 Blood Pressure Monitor User Manual

The Microlife Aponorm 06575428 is an automatic upper arm blood pressure monitor designed for accurate and convenient home measurement. It features a large, easy-to-read LCD display, one-touch operation, irregular heartbeat detection, 2-user memory with 60 measurements each, WHO classification indicator, and an adjustable cuff for arm circumferences 22-42 cm. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable upper arm cuff, Air tube, 4x AA batteries, Instruction manual.

Safety Information

Read all instructions before use. For home use only.

1. Do not use on infants, small children, or persons unable to express their consent.
2. Consult your physician before use if you have arrhythmia, blood circulation problems, or other severe conditions.
3. Do not use the device on an injured or sore arm.
4. Do not inflate the cuff when not wrapped around the arm.
5. Keep the device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your doctor about your blood pressure.

Package Contents

• Microlife Aponorm 06575428 Blood Pressure Monitor (Main Unit)
• Adjustable Upper Arm Cuff (22-42 cm)
• Air Tube (permanently attached to cuff)
• 4 x AA 1.5V Alkaline Batteries
• Instruction Manual
• Quick Start Guide
• Storage Case

CAUTION! Inspect all parts for damage before use. Do not use if any part is damaged.

Device Overview

Front Panel: START/STOP button, Memory button (M1/M2), User Select button (USER 1/USER 2).

LCD Display: Shows systolic pressure, diastolic pressure, pulse rate, date, time, user indicator, memory number, battery icon, WHO indicator bar, and IHD symbol.

Cuff & Connector: Cuff with Velcro closure and metal D-ring. Connector plugs into the port on the left side of the main unit.

Battery Compartment: Located on the back of the device.

Initial Setup

Before first use, install batteries and set the date/time.

1. Insert Batteries: Open the battery compartment on the back. Insert 4 AA batteries observing correct polarity (+/-). Close the compartment.
2. Set Date & Time: Press and hold the MEMORY button for 3 seconds. Use the USER buttons to adjust values and START/STOP to confirm and move to the next setting (Year -> Month -> Day -> Hour -> Minute).
3. Connect Cuff: Plug the cuff tube connector firmly into the port on the left side of the device.

Tip: For accurate time-stamping of measurements, ensure the date and time are set correctly.

Taking a Measurement

For reliable results, rest for 5 minutes before measuring. Avoid eating, smoking, or exercising 30 minutes prior.

1. Sit Correctly: Sit on a chair with back support, feet flat on the floor. Rest your arm on a table so the cuff is at heart level.
2. Apply Cuff: Place cuff on bare upper arm (left arm recommended). The bottom edge should be 2-3 cm above the elbow. The air tube should run down the center of your inner arm. Secure snugly with Velcro.
3. Select User: Press the USER button to select USER 1 or USER 2. The corresponding icon will appear on the display.
4. Start Measurement: Press the START/STOP button. The device will inflate automatically. Remain still and quiet. Do not move your arm or talk.
5. Read Results: After deflation, your systolic/diastolic pressure and pulse will display. The WHO bar will indicate the classification. The result is automatically saved to the selected user's memory.
6. Power Off: The device turns off automatically about 1 minute after measurement.

WARNING! Do not inflate the cuff more than once within 2-3 minutes to allow circulation to return to normal.

Memory Function

The device stores 60 measurements for each of two users (M1 and M2).

1. View Memory: Press the MEMORY button briefly. The display shows the most recent result for the selected user, along with the memory number and average of the last 3 readings.
2. Scroll Through Memory: Press the MEMORY button repeatedly to scroll through all stored measurements for the current user, from newest to oldest.
3. Switch User Memory: Press the USER button to switch between USER 1 and USER 2 memory banks, then press MEMORY to view.
4. Clear Memory: To clear all memory for the current user, press and hold the USER button for 5 seconds while in memory mode. "CLR" will flash, then all readings for that user will be deleted.

Understanding Results

• Systolic Pressure: The higher number (e.g., 120 mmHg). Pressure when the heart beats.
• Diastolic Pressure: The lower number (e.g., 80 mmHg). Pressure when the heart rests between beats.
• Pulse Rate: Beats per minute (e.g., 72 bpm).
• WHO Indicator Bar: A colored bar on the right side of the display indicates classification:
  • Green (Low/Normal): Optimal/ Normal blood pressure.
  • Yellow (High Normal/ Grade 1): Elevated/ Mild hypertension.
  • Orange (Grade 2): Moderate hypertension.
  • Red (Grade 3): Severe hypertension.
• IHD Symbol (Irregular Heartbeat): If this symbol appears, an irregular heartbeat was detected during the measurement. Consult your physician if it appears frequently.

Care & Maintenance

Unplug cuff and remove batteries before cleaning.

1. Clean the main unit and cuff with a soft, slightly damp cloth. Do not immerse in water or use solvents.
2. Store the device in the provided case in a cool, dry place away from direct sunlight, extreme temperatures, and dust.
3. Do not bend or kink the air tube.
4. Replace batteries when the low battery icon appears on the display.

CAUTION! Do not attempt to repair, disassemble, or modify the device. There are no user-serviceable parts inside.

Technical Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22 - 42 cm (9 - 16.5 inches) arm circumference
• Memory: 2 x 60 measurements with date & time stamp
• Power Supply: 4 x 1.5V AA batteries (LR6) or optional AC adapter (specified model)
• Automatic Shut-off: Approx. 1 minute after measurement
• Operating Conditions: 10°C to 40°C (50°F to 104°F), 15% to 90% relative humidity (non-condensing)
• Dimensions (Main Unit): Approx. 118mm (W) x 105mm (H) x 62mm (D)
• Weight (without batteries): Approx. 285g

Troubleshooting

Reset: Remove batteries for 1 minute to perform a full system reset.

Service: For technical support or service, contact Microlife Customer Service or visit www.microlife.com. Do not open the device.