Microlife Aponorm Professional Control Blood Pressure Monitor User Manual

The Microlife Aponorm Professional Control is a clinically validated, automatic upper arm blood pressure monitor designed for professional and home use. It features advanced Microlife Average Mode (MAM) technology for reliable average readings, irregular heartbeat detection, hypertension indicator, large memory storage, adjustable cuff, clear display with backlight, and data transfer capabilities. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable upper arm cuff, Air tube, AC adapter port, USB port for data, START/STOP button, MEMORY button, MAM button.

Safety Information

Read all instructions before use.

1. Intended for measuring blood pressure and pulse rate on the upper arm.
2. Not suitable for patients with pre-eclampsia without medical supervision.
3. Do not use on injured or sore arms.
4. Do not use near strong electromagnetic fields (e.g., MRI).
5. Keep device dry and away from extreme temperatures.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your doctor for interpretation of results and treatment.

Package Contents

• Microlife Aponorm Professional Control monitor (main unit)
• Adjustable upper arm cuff (22-42 cm)
• Air tube (permanently attached to cuff)
• 4 x AA batteries
• Instruction manual
• Quick start guide
• Storage case

CAUTION! Inspect contents upon unpacking. Do not use if any part appears damaged.

Device Overview

Front Panel: LCD Display, START/STOP Button, MEMORY Button, MAM Button, USER Button (1/2).

Side/Back: AC Adapter Socket, USB Port (for data), Cuff Socket, Battery Compartment.

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, Irregular Heartbeat Symbol, Hypertension Indicator Bar, User Icon, Memory Icon, Battery Icon, Date/Time, MAM Icon.

Initial Setup

Power on the device and configure basic settings.

1. Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set Date & Time: Press and hold MEMORY button for 3 seconds. Use START/STOP to adjust values.
3. Select User: Press USER button to select User 1 or User 2 for separate memory.
4. Cuff Application: Wrap cuff snugly around bare upper arm, 1-2 cm above elbow. Align artery marker with brachial artery.

Tip: For most accurate results, rest for 5 minutes before first measurement.

Taking a Measurement

Follow these steps for a proper reading.

1. Sit correctly: Sit on a chair with back support, feet flat on floor, legs uncrossed.
2. Position arm: Rest arm on a table so cuff is at heart level.
3. Connect cuff: Plug air tube into device socket.
4. Start measurement: Press START/STOP button. Cuff will inflate automatically.
5. Remain still: Do not talk or move during measurement.
6. Read results: Systolic, diastolic, and pulse rate display after cuff deflates.
7. For MAM mode: Press MAM button before starting. Device takes 3 readings with 30-second pauses and displays average.

WARNING! Do not inflate cuff when not wrapped around arm.

Understanding Your Results

The display shows systolic (high number) and diastolic (low number) pressure in mmHg, and pulse rate in BPM.

Hypertension Indicator (Bar Graph): - Green: Optimal/Normal (<130/85 mmHg) - Yellow: High Normal (130-139/85-89 mmHg) - Orange: Grade 1 Hypertension (140-159/90-99 mmHg) - Red: Grade 2 or 3 Hypertension (>=160/100 mmHg)

Irregular Heartbeat Symbol: Appears if an irregular rhythm is detected during measurement. Consult your doctor if it appears frequently.

Memory & Data Management

Stores 99 readings per user.

1. View Memory: Press MEMORY button once to scroll through stored readings.
2. Delete Last Reading: Press and hold MEMORY button while last reading is displayed.
3. Delete All for Current User: With device off, press and hold MEMORY and USER buttons simultaneously for 3 seconds.
4. Data Transfer: Connect USB cable (optional) to PC and use Microlife software to download readings.

Care & Maintenance

Unplug cuff and remove batteries before cleaning.

1. Clean casing with a soft, slightly damp cloth. Do not immerse in water.
2. Clean cuff with mild soap and damp cloth. Air dry completely.
3. Store in provided case in a cool, dry place.
4. Replace batteries when low battery icon appears.
5. Do not expose to direct sunlight, heat, or humidity.

CAUTION! Do not use alcohol, solvents, or abrasive cleaners. Do not attempt to repair device yourself.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-199 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (standard adult)
• Memory: 99 readings x 2 users
• Power Supply: 4 x 1.5V AA batteries or 6V DC adapter (optional)
• Automatic Shut-off: Approx. 1 minute after last operation
• Operating Conditions: 10°C to 40°C, 15% to 90% RH (non-condensing)
• Dimensions (Unit): Approx. 128 mm x 105 mm x 65 mm
• Weight (Unit): Approx. 300 g (without batteries)

Troubleshooting

Reset: Remove batteries for 5 minutes to reset device.

Service: For technical support, contact Microlife Customer Service or visit www.microlife.com. Do not open the device.