Microlife BP 2BHO Blood Pressure Monitor User Manual

The Microlife BP 2BHO is an automatic upper-arm blood pressure monitor with clinically validated accuracy, featuring one-touch operation, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, large LCD display, adjustable cuff, and WHO classification indicator. It is designed for home use to monitor systolic, diastolic pressure, and pulse rate. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable arm cuff, Air tube, 4x AA batteries, Storage case, Instruction manual.

Safety Information

Read all instructions before use. For accurate measurements, follow guidelines.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician for interpretation of readings and treatment decisions.
3. Do not use during vehicle operation or if drowsy.
4. Keep away from electromagnetic fields (microwaves, mobile phones).

WARNING! Not for use with pacemakers or other electronic implants. Do not inflate cuff when not wrapped on arm.

Package Contents

Unpack and verify all items are present.

• Microlife BP 2BHO monitor (main unit)
• Adjustable arm cuff (22-42 cm)
• Air tube (pre-connected)
• 4 x AA batteries (1.5V)
• Instruction manual
• Storage case
• Quick start guide

CAUTION! Do not use if any component is damaged. Contact retailer or Microlife service.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER 1/USER 2 buttons, LCD display. Cuff: Arm band with metal ring, Velcro closure, air tube connector.

Display Symbols: Systolic/Diastolic pressure, Pulse rate, Irregular heartbeat icon, Hypertension indicator, WHO color bar (green/yellow/red), User icon, Memory icon, Battery indicator, Date/Time.

Back: Battery compartment, Reset button (small hole).

First-Time Setup

Prepare device for first measurement.

1. Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set Date/Time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Apply Cuff: Wrap cuff on bare upper arm 1-2 cm above elbow, tube aligned with artery.
4. Rest: Sit quietly for 5 minutes before first measurement.

Tip: Ensure cuff is snug but not tight; you should fit one finger underneath.

Taking a Measurement

For accurate results, follow proper procedure.

1. Sit comfortably on chair with back supported, feet flat on floor.
2. Rest arm on table with cuff at heart level.
3. Press USER 1 or USER 2 to select user profile.
4. Press START/STOP button. Cuff inflates automatically.
5. Remain still and quiet during measurement.
6. Reading displays when measurement is complete. Cuff deflates automatically.
7. Record results if desired. Device stores automatically.
8. Wait at least 3 minutes before next measurement on same arm.

WARNING! Do not move or talk during measurement. Remove tight clothing from arm.

Understanding Results

Display shows systolic pressure (top), diastolic pressure (middle), pulse rate (bottom).

Note: Consult physician for interpretation and action plan based on readings.

Memory Function

Stores up to 99 measurements per user (2 users total).

1. View Memory: Press MEMORY button once to see last reading. Press again to scroll through stored readings.
2. Average Value: After 3+ readings, display shows average of last 3 when memory is accessed.
3. Delete Memory: Press and hold USER 1 and USER 2 simultaneously for 5 seconds to clear all readings for active user.
4. Date/Time Stamp: Each stored reading includes date and time of measurement.

Tip: Regular tracking helps monitor trends. Share memory data with healthcare provider.

Care & Maintenance

Proper care ensures accuracy and longevity.

• Clean cuff with damp cloth only; do not immerse in water.
• Store in case provided; avoid extreme temperatures, humidity, dust.
• Remove batteries if not used for extended period (months).
• Replace batteries when low battery icon appears.
• Do not disassemble device; no user-serviceable parts inside.

CAUTION! Do not use alcohol, solvents, or abrasives. Do not expose to direct sunlight.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-199 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Cuff Size: 22-42 cm arm circumference
• Memory: 99 measurements x 2 users
• Power Supply: 4 x 1.5V AA batteries (LR6)
• Battery Life: Approx. 500 measurements
• Dimensions: Main unit: 135 x 105 x 60 mm
• Weight: Approx. 350g (without batteries)
• Operating Conditions: 10°C to 40°C, 15-85% RH
• Storage Conditions: -20°C to 60°C, ≤93% RH

Troubleshooting

Reset: Use small pin to press reset button in battery compartment if device malfunctions.

Service: Do not attempt repair. Contact Microlife service center or authorized dealer.

Support: www.microlife.com or customer service hotline provided in regional manual.