Microlife BP 3AQ1 Blood Pressure Monitor User Manual

The Microlife BP 3AQ1 is an automatic upper arm blood pressure monitor with clinically validated accuracy, featuring the patented AFIB (Atrial Fibrillation) detection technology, large LCD display with backlight, one-touch operation, adjustable cuff (22-42 cm), memory storage for multiple users, irregular heartbeat detection, WHO classification indicator, date/time function, and automatic power-off. Powered by 4xAA batteries or optional AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable arm cuff, Air tube, 4xAA batteries, Instruction manual, Storage case.

Safety Information

Read all instructions before use. Keep for future reference.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or arterial sclerosis.
3. Do not use during or immediately after physical exercise, bathing, eating, or drinking.
4. Do not wrap cuff over clothing or apply to injured arm.
5. Keep device away from electromagnetic fields (microwaves, mobile phones).

WARNING! This device is for home use only, not for professional medical diagnosis. Always consult your physician for medical advice.

Package Contents

• Microlife BP 3AQ1 Blood Pressure Monitor (main unit)
• Adjustable upper arm cuff (22-42 cm)
• Air tube (pre-connected)
• 4xAA batteries (1.5V alkaline)
• Instruction manual (this document)
• Storage case
• Warranty card

CAUTION! Check all contents upon unpacking. Do not use if any parts are damaged or missing.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button, USER button (1/2), DATE/TIME button.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, AFIB indicator, Irregular heartbeat symbol, WHO classification bar (green/yellow/red), User indicator, Battery icon, Memory icon, Date/Time display.

Side/Back: Air tube connector, AC adapter port (optional), Battery compartment.

First-Time Setup

1. Insert batteries: Open battery compartment, insert 4xAA batteries observing polarity.
2. Set date and time: Press and hold DATE/TIME button, use START to adjust values.
3. Select user: Press USER button to select User 1 or User 2 for separate memory storage.
4. Apply cuff correctly: Wrap cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.
5. Positioning: Sit comfortably with back supported, feet flat on floor, arm supported at heart level.

Tip: Rest for 5 minutes before first measurement. Avoid talking or moving during measurement.

Taking a Measurement

1. Sit in correct position as described in First-Time Setup.
2. Wrap cuff securely but not too tightly (should fit one finger underneath).
3. Press START button. Device will automatically inflate.
4. Remain still and quiet during measurement. Do not move arm or talk.
5. Device will deflate automatically and display results.
6. Results will show: Systolic pressure, Diastolic pressure, Pulse rate, and any detected irregularities.
7. Press START again for another measurement (wait 2-3 minutes between readings).
8. Device automatically powers off after 1 minute, or press and hold START to turn off immediately.

WARNING! Do not inflate cuff when not attached to arm. Maximum pressure is 300 mmHg.

Understanding Results

Blood Pressure Values: Displayed as systolic/diastolic (e.g., 120/80 mmHg)

WHO Classification Indicator: - Green: Normal (systolic < 135, diastolic < 85) - Yellow: Mild hypertension (systolic 135-159, diastolic 85-99) - Red: Severe hypertension (systolic ≥ 160, diastolic ≥ 100)

AFIB Indicator: Flashing heart symbol with "AFIB" text appears if atrial fibrillation is detected during measurement.

Irregular Heartbeat Symbol: Appears if irregular heartbeat is detected (but not confirmed AFIB).

Error Symbols: E1-E5 codes indicate measurement errors (see Troubleshooting section).

Memory Function

Stores up to 99 measurements per user (2 users total).

1. View memory: Press MEMORY button to scroll through stored measurements.
2. Average value: After displaying all stored values, device shows average of last 3 measurements.
3. Delete memory: While in memory mode, press and hold MEMORY button for 3 seconds to delete all readings for current user.
4. User selection: Press USER button to switch between User 1 and User 2 memory.

Note: Memory is maintained when batteries are replaced (if done within 3 minutes).

Care & Maintenance

• Clean device with soft, dry cloth only. Do not use liquids or chemicals.
• Store in provided case when not in use, in a cool, dry place.
• Remove batteries if device will not be used for extended period.
• Replace batteries when low battery icon appears on display.
• Do not disassemble device. No user-serviceable parts inside.
• Cuff can be cleaned with mild soap and water (remove from monitor first).

CAUTION! Do not immerse device in water. Avoid extreme temperatures and humidity.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• AFIB Detection Sensitivity: >94% (clinical validation)
• Cuff Size: 22-42 cm arm circumference
• Memory: 99 measurements x 2 users
• Power Supply: 4xAA 1.5V batteries or DC 6V 500mA adapter (optional)
• Battery Life: Approximately 500 measurements (alkaline batteries)
• Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
• Weight: Approximately 300g (without batteries)
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: ≤85% RH

Troubleshooting

Reset: Remove batteries for 3 minutes to reset device to factory settings (erases memory).

Service: For technical support, contact Microlife Customer Service at 1-800-566-3456 or visit www.microlife.com