Microlife BP 3BTO-H Blood Pressure Monitor User Manual

The Microlife BP 3BTO-H is an automatic upper arm blood pressure monitor designed for home use. It features one-touch operation, a large LCD display, irregular heartbeat detection, 2-user memory (60 readings each), WHO blood pressure classification indicator, and an adjustable cuff. Below are key sections for safety, features, setup, measurement, memory, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable upper arm cuff, Air tube, AC adapter port, Battery compartment, START/STOP button.

Safety Information

Read all instructions before use.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use during or immediately after physical exercise.
4. Do not inflate cuff when not wrapped around arm.
5. Keep device away from children.

WARNING! This device is for home monitoring only, not for medical diagnosis. Consult your doctor for interpretation of readings.

Package Contents

• Microlife BP 3BTO-H monitor (main unit)
• Adjustable upper arm cuff with air tube
• 4 x AA batteries
• Instruction manual
• Storage case
• Warranty card

Note: AC adapter sold separately.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button, USER 1/2 buttons.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, WHO indicator (color bars), User icon, Memory icon, Irregular heartbeat symbol, Battery indicator, Date/Time.

Connections: Air tube connector, AC adapter port (DC 6V).

Cuff: Velcro closure, artery marker, metal ring for tube connection.

Initial Setup

Before first use:

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Connect cuff: Insert air tube connector into device port until it clicks.
4. Select user: Press USER 1 or USER 2 button to select your memory profile.

CAUTION! Do not mix old and new batteries. Remove batteries if device will not be used for extended period.

Taking a Measurement

For accurate results:

1. Rest for 5 minutes before measuring.
2. Sit comfortably with back supported and feet flat on floor.
3. Wrap cuff on bare upper arm, 1-2 cm above elbow. Artery marker should align with brachial artery.
4. Keep cuff at heart level. Rest arm on table.
5. Press START/STOP button. Device will inflate automatically.
6. Remain still and quiet during measurement.
7. Results display automatically with WHO classification.
8. Device deflates and powers off after 1 minute.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Device stores 60 readings for each of 2 users.

1. Select user: Press USER 1 or USER 2 before measurement.
2. View memory: Press MEMORY button to scroll through stored readings for selected user.
3. Average value: Last 3 readings taken within 10 minutes are averaged automatically.
4. Clear memory: Press and hold USER 1 and USER 2 simultaneously for 3 seconds (clears current user's memory only).

Note: Memory includes date, time, systolic, diastolic, pulse, and irregular heartbeat detection.

Understanding Results

Irregular Heartbeat Symbol: Appears if irregular rhythm detected during measurement. Consult physician if frequent.

Care & Maintenance

Unplug air tube and remove batteries before cleaning.

1. Clean device with slightly damp cloth only. Do not immerse in water.
2. Clean cuff with mild soap and damp cloth. Air dry completely before storage.
3. Store in provided case in cool, dry place away from direct sunlight.
4. Do not expose to extreme temperatures, humidity, or strong magnetic fields.
5. Replace cuff if damaged or if Velcro loses adhesion.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble device.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Memory: 2 x 60 readings with date/time
• Cuff Size: 22-42 cm (8.7-16.5 inches)
• Power Supply: 4 x 1.5V AA batteries or DC 6V adapter
• Battery Life: Approx. 500 measurements (alkaline batteries)
• Dimensions: 128 x 102 x 58 mm (main unit)
• Weight: Approx. 300g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% RH

Troubleshooting

Reset: Remove batteries for 1 minute to reset device.

Service: Do not attempt to repair. Contact Microlife customer service or authorized dealer.