Microlife BP A100 Plus Blood Pressure Monitor User Manual

The Microlife BP A100 Plus is an automatic upper arm blood pressure monitor with clinically validated accuracy, one-touch operation, irregular heartbeat detection, 2-user memory with 99 readings each, adjustable cuff (22-42 cm), large LCD display with backlight, date/time display, automatic averaging of last 3 readings, WHO blood pressure classification indicator, and hypertension detection. Powered by 4 AA batteries or optional AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, adjustable arm cuff, air tube, 4 AA batteries, instruction manual, and storage case.

Safety Information

Read all instructions before use. Important safety precautions:

1. Do not use on infants, young children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use during or immediately after physical exercise.
4. Wait at least 5 minutes between consecutive measurements on the same person.
5. Do not use in presence of flammable gases or in oxygen-rich environments.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure readings.

Package Contents

• Main Unit: Blood pressure monitor with display
• Arm Cuff: Adjustable cuff (22-42 cm) with Velcro closure
• Air Tube: Connects cuff to main unit
• Batteries: 4 AA alkaline batteries
• Instruction Manual: Complete user guide
• Storage Case: For device protection and portability
• Warranty Card: Manufacturer's warranty information

CAUTION! Check all contents before use. Do not use if any parts are damaged or missing.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button, USER SELECT button (1/2), DATE/TIME SET button.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, User indicator (1/2), Memory full indicator, Irregular heartbeat symbol, WHO classification bar, Battery indicator, Date/Time display, Average indicator.

Side/Back: Air tube connector, AC adapter jack (optional), battery compartment.

Initial Setup

Prepare device for first use:

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing correct polarity.
2. Connect cuff: Attach air tube to connector on side of unit until it clicks.
3. Set date and time: Press DATE/TIME button, use START/STOP to adjust values, press MEMORY to confirm.
4. Select user: Press USER SELECT to choose User 1 or User 2 for memory storage.
5. Apply cuff correctly: Position cuff on bare upper arm 1-2 cm above elbow.

Tip: Rest for 5 minutes before first measurement. Sit comfortably with feet flat on floor.

Taking a Measurement

For accurate readings, follow these steps:

1. Sit comfortably with back supported and feet flat on floor.
2. Apply cuff to left arm (unless instructed otherwise by physician).
3. Position cuff so air tube runs down center of arm toward hand.
4. Rest arm on table with cuff at heart level.
5. Press START/STOP button - device will inflate automatically.
6. Remain still and quiet during measurement.
7. Read results on display when measurement completes.
8. Press START/STOP again to turn device off, or it will auto-power-off after 1 minute.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accurate results.

Memory Function

The device stores 99 readings for each of two users:

• Select User: Press USER SELECT to choose User 1 or User 2 before measurement.
• View Memory: Press MEMORY button to scroll through stored readings.
• Automatic Date/Time: Each reading is stored with date and time stamp.
• Memory Full: When memory is full, oldest reading is automatically deleted.
• Average Function: Device automatically calculates average of last 3 consecutive readings.

Note: Memory is maintained when batteries are changed if done within 3 minutes.

Special Features

Irregular Heartbeat Detection: Symbol appears if irregular heartbeat is detected during measurement. If detected frequently, consult your physician.

WHO Classification Indicator: Bar graph shows whether reading is Optimal, Normal, High Normal, or Hypertension according to WHO guidelines.

Automatic Averaging: After three consecutive readings taken within 10 minutes, average is calculated and displayed with AVG symbol.

Hypertension Detection: If systolic pressure ≥ 135 mmHg or diastolic ≥ 85 mmHg, device may alert user (consult manual for specific thresholds).

Care & Maintenance

Proper care ensures accurate measurements and device longevity:

1. Clean cuff with mild soap and damp cloth only; do not immerse in water.
2. Clean main unit with dry soft cloth; do not use solvents or abrasives.
3. Store in provided case when not in use.
4. Remove batteries if device will not be used for extended period.
5. Replace batteries when low battery symbol appears.
6. Do not expose to extreme temperatures, humidity, or direct sunlight.

CAUTION! Do not attempt to repair device yourself. Contact authorized service center.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm arm circumference
• Memory: 99 readings for 2 users (198 total)
• Power Supply: 4 x 1.5V AA batteries or 6V DC adapter (optional)
• Battery Life: Approximately 500 measurements
• Dimensions: 123mm (W) x 98mm (H) x 142mm (D)
• Weight: Approximately 350g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% relative humidity

Troubleshooting

Reset: Remove batteries for 3 minutes to reset device to factory settings (clears memory).

Service: For technical support, contact Microlife customer service at 1-800-432-6334 or visit www.microlife.com