Microlife BP A2 Basic HEALTHY PACK Blood Pressure Monitor User Manual

The Microlife BP A2 Basic HEALTHY PACK is an automatic upper arm blood pressure monitor designed for home use. It features Microlife's patented AFIB detection technology for irregular heartbeat screening, one-touch operation, a large LCD display with backlight, memory storage for multiple users, WHO blood pressure classification indicator, and a comfortable D-ring cuff. The HEALTHY PACK includes the monitor, cuff, instruction manual, batteries, and storage case. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, D-ring arm cuff, battery compartment, START/STOP button, MEMORY button.

Safety Information

Read all instructions before use. For home use only.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or arterial sclerosis.
3. Do not use on injured or sore arms.
4. Wait at least 5 minutes between consecutive measurements on the same person.
5. Do not use near flammable gases or in oxygen-rich environments.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your doctor for interpretation of measurements.

Package Contents

Unpack and verify all components are present.

• Microlife BP A2 Basic monitor (1 unit)
• D-Ring arm cuff (22-42 cm) (1 piece)
• Instruction manual (1 copy)
• AA batteries (4 pieces)
• Storage case (1 piece)
• Quick start guide (1 copy)

CAUTION! Do not use if any components are damaged. Contact customer service for replacement.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button. Cuff: Air tube connector, D-ring fastener, artery marker.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, AFIB symbol, Irregular heartbeat symbol, User indicator (1/2), Memory full indicator, Battery low indicator, WHO classification bar, Date/Time.

Cuff Application: Position cuff on bare upper arm with artery marker over brachial artery. Secure with D-ring.

Before First Use

Prepare device for initial measurements.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Apply cuff correctly: Sit quietly for 5 minutes before first measurement.
4. Test device: Take a practice measurement to ensure proper operation.

Tip: For accurate results, avoid eating, smoking, or exercising 30 minutes before measurement.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably on a chair with back support, feet flat on floor.
2. Rest for 5 minutes before measuring.
3. Apply cuff to left upper arm (unless instructed otherwise by doctor).
4. Position cuff at heart level, tube facing downward.
5. Press START/STOP button - device will inflate automatically.
6. Remain still and quiet during measurement.
7. Read results on display when measurement completes.
8. Press START/STOP to turn off, or wait for automatic shutoff.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accurate results.

Understanding Results

The display shows systolic pressure, diastolic pressure, and pulse rate.

AFIB Symbol: If appears, possible atrial fibrillation detected - consult physician.

Irregular Heartbeat Symbol: Pulse irregularity detected during measurement.

Memory Function

Stores up to 99 measurements for each of 2 users.

1. Select user: Press MEMORY button before measurement to select User 1 or User 2.
2. Recall memory: Press and release MEMORY button to scroll through stored readings.
3. Clear memory: Press and hold MEMORY button for 5 seconds until "CLr" appears.
4. Memory full: When memory is full, oldest reading is automatically deleted.

Note: Each reading includes date, time, systolic, diastolic, pulse rate, and any detection symbols.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

• Clean cuff with mild soap and damp cloth only; do not immerse in water.
• Clean monitor with dry, soft cloth; no liquids or chemicals.
• Store in provided case in a cool, dry place.
• Remove batteries if not using for extended period (more than 3 months).
• Replace batteries when low battery symbol appears.

CAUTION! Do not disassemble device. No user-serviceable parts inside.

Technical Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (upper arm circumference)
• Memory: 99 readings x 2 users
• Power Supply: 4 x 1.5V AA batteries or DC 6V adapter (optional)
• Battery Life: Approximately 500 measurements (alkaline batteries)
• Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
• Weight: Approximately 300g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% RH

Troubleshooting

Reset: Remove batteries for 5 minutes to reset device.

Service: For technical support, contact Microlife Customer Service or visit www.microlife.com