Microlife BP A6 Easy Blood Pressure Monitor User Manual

The Microlife BP A6 Easy is a fully automatic upper arm blood pressure monitor designed for easy, accurate, and comfortable home use. It features Microlife's patented Gentle+ technology for gentle inflation, a large backlit display, irregular heartbeat detection, 2-user memory with 99 readings each, WHO blood pressure classification indicator, and one-touch operation. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with large LCD display, Easy-Wrap cuff with D-Ring, AC adapter, storage case, and user manual.

Safety Information

Read all instructions before use. For home use only.

1. Do not use on infants, children, or persons unable to express their consent.
2. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use the device on an injured or sore arm.
4. Do not use in explosive atmospheres or near high-frequency surgical equipment.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your doctor about your blood pressure.

Package Contents

Unpack and verify all items are present.

1. Microlife BP A6 Easy main unit.
2. Easy-Wrap Cuff (22-42 cm).
3. AC Adapter (optional, for mains power).
4. 4 x 1.5V AA batteries (for battery operation).
5. Storage case.
6. User manual and quick start guide.

CAUTION! Do not use if any part of the packaging or device is damaged.

Device Overview

• Display: Shows systolic/diastolic pressure, pulse rate, user icon, memory index, date/time, WHO indicator, and error symbols.
• START/STOP Button: Single control button for all operations.
• SET Button: For setting date, time, and user selection (located on the side).
• Cuff Port: Connection for the air hose.
• AC Adapter Socket: For connecting to mains power (optional).
• Battery Compartment: Holds 4 AA batteries.

Before First Use

Power on device; set date and time for accurate record keeping.

1. Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set Date/Time: Press and hold SET button, use START/STOP to adjust values.
3. Select User: Press SET briefly to toggle between User 1 and User 2 icons.
4. Apply Cuff: Ensure cuff is correctly sized and positioned on bare upper arm.

CAUTION! Use correct cuff size. An ill-fitting cuff can cause inaccurate readings.

Taking a Measurement

For most accurate results, rest for 5 minutes before measuring.

1. Sit correctly: Sit on a chair with back support, feet flat on the floor.
2. Apply cuff: Place cuff on left upper arm (2-3 cm above elbow). Tube should run down center of arm.
3. Position arm: Rest arm on a table so cuff is at heart level.
4. Start measurement: Press START/STOP button. Cuff will inflate automatically.
5. Remain still: Do not move or talk during measurement.
6. Read results: Systolic, diastolic pressure and pulse rate display. WHO indicator lights.
7. Device deflates and powers off automatically.

Tip: Take measurements at the same time each day for consistent tracking.

Understanding Your Results

The device displays systolic pressure (higher number), diastolic pressure (lower number), and pulse rate.

WHO Indicator: Color-coded bar on the right side of the display: - Green: Optimal/Normal blood pressure. - Yellow: High-Normal/Mild Hypertension. - Orange: Moderate Hypertension. - Red: Severe Hypertension.

Irregular Heartbeat Symbol: If this icon appears during or after measurement, it may indicate a pulse irregularity. Consult your physician if it appears frequently.

Average Value: The average of the last 3 readings (taken within 10 minutes) is displayed after the third measurement.

Memory Function

Stores 99 readings for each of two users.

1. Select User: Press SET button to choose User 1 or User 2 icon.
2. Recall Memory: Press and hold START/STOP button for 3 seconds to enter memory mode. Press briefly to scroll through stored readings.
3. Delete Memory: In memory mode, press and hold SET button to delete all readings for the selected user.

WARNING! Deleting memory is permanent. Ensure you have recorded important readings elsewhere.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning. Use a soft, slightly damp cloth. Do not immerse in water.

1. Cuff: Clean with mild soap and water. Do not machine wash or tumble dry.
2. Device: Wipe display and body with dry cloth.
3. Storage: Keep in provided case in a cool, dry place away from direct sunlight.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble the device.

Technical Specifications

• Measurement Method: Oscillometric.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Cuff Size: 22-42 cm (arm circumference).
• Memory: 2 x 99 readings with date & time.
• Power Supply: 4 x 1.5V AA batteries or 6V DC AC adapter.
• Battery Life: Approx. 500 measurements (alkaline batteries).
• Operating Conditions: 10°C to 40°C, 15% to 90% RH (non-condensing).
• Dimensions: Approx. 128mm (W) x 105mm (H) x 142mm (D).
• Weight: Approx. 350g (without batteries).

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute to reset the device.

Service: Do not attempt to repair. For service, contact Microlife customer support or your local dealer.