Microlife BP B2 Plus Blood Pressure Monitor User Manual

The Microlife BP B2 Plus is an automatic upper-arm blood pressure monitor designed for home use. It features one-touch operation, a large LCD display, irregular heartbeat detection, 2-user memory with 99 measurements each, WHO classification indicator, date/time display, and an adjustable cuff. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Device Overview 5. Initial Setup 6. Taking a Measurement 7. Memory Function 8. Understanding Results 9. Care & Maintenance 10. Troubleshooting 11. Specifications

Features at a Glance

Key components: Main unit with LCD display, adjustable upper-arm cuff, air tube, AC adapter port, and battery compartment.

Feature	Description
One-Touch Operation	Automatic inflation and measurement
Large LCD Display	Clear readout of systolic, diastolic, pulse, and date/time
WHO Classification Indicator	Color-coded bar graph showing blood pressure category
2-User Memory	Stores 99 measurements per user
Irregular Heartbeat Detection	Detects and displays irregular heartbeat symbol
Adjustable Cuff	Fits arm circumferences 22-42 cm (8.7-16.5 inches)
Date & Time Stamp	Records measurement date and time
Automatic Power Off	Conserves battery life
START/STOP Button	Initiates and stops measurement
MEMORY Button	Recalls stored measurements

Safety Information

Read all instructions before use.

Do not use on infants, small children, or persons unable to express themselves.
Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
Do not use the device on an injured arm or after surgery.
Do not use in areas with high humidity or near flammable gases.

WARNING! This device is for home use only and is not a substitute for professional medical diagnosis. Ensure proper cuff placement for accurate readings.

Package Contents

Microlife BP B2 Plus monitor (main unit)
Adjustable upper-arm cuff
Air tube (pre-connected)
4 x AA batteries
Instruction manual
Storage case
Warranty card

CAUTION! Inspect contents upon unboxing. Do not use if any part is damaged.

Device Overview

Front: LCD display, START/STOP button, MEMORY button, USER 1/2 selector. Side: AC adapter port. Rear: Battery compartment.

Display Symbols: Systolic/Diastolic pressure, Pulse rate, WHO bar graph, User indicator, Irregular heartbeat symbol, Date/Time, Battery icon, Memory full icon.

Cuff: Velcro closure, artery marker, metal ring for tube connection.

Initial Setup

Power on device; set date and time.

Insert batteries: Open compartment, insert 4 AA batteries observing polarity.
Set date/time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
Attach cuff: Connect air tube to port on side of monitor.
Select user: Press USER button to choose User 1 or User 2.

Tip: For first use, rest for 5 minutes before taking a measurement.

Taking a Measurement

Supports seated measurements on left arm.

Sit comfortably: Rest for 5 minutes, feet flat, back supported.
Apply cuff: Place on bare upper arm, artery marker over brachial artery, 2-3 cm above elbow.
Position arm: Rest on table with cuff at heart level.
Start measurement: Press START/STOP. Cuff inflates automatically.
Remain still: Do not talk or move during measurement.
Read results: Systolic, diastolic, and pulse display after deflation.
Power off: Device turns off automatically after 1 minute.

WARNING! Do not inflate cuff without proper placement. Excessive pressure may cause injury.

Memory Function

Stores 99 measurements per user with date/time stamp.

Select user: Press USER button to choose User 1 or User 2.
View memory: Press MEMORY button to scroll through stored readings.
Clear memory: Press and hold MEMORY and START/STOP for 3 seconds (resets current user's memory).
Average: Last 3 measurements average displays when memory is viewed.

Note: Memory full icon appears when 99 measurements are stored.

Understanding Results

WHO classification bar graph:

Color Zone	Category	Systolic/Diastolic Range
Blue	Low	< 90 / < 60 mmHg
Green	Normal	90-119 / 60-79 mmHg
Yellow	Prehypertension	120-139 / 80-89 mmHg
Orange	Hypertension Stage 1	140-159 / 90-99 mmHg
Red	Hypertension Stage 2	≥ 160 / ≥ 100 mmHg

Irregular heartbeat symbol: Appears if irregular rhythm detected during measurement. Consult physician if frequent.

Care & Maintenance

Remove batteries before cleaning. Use slightly damp cloth; do not immerse.

Cuff: Wipe with damp cloth; air dry completely.
Monitor: Clean with dry cloth; avoid liquids.
Storage: Keep in case, away from extreme temperatures and humidity.
Batteries: Replace when low battery icon appears. Remove if not used for extended period.

CAUTION! Do not use alcohol, solvents, or abrasives. Do not disassemble.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries.
Error code E1	Cuff not attached	Connect cuff securely to monitor.
Error code E2	Cuff over-inflated	Reposition cuff; restart measurement.
Inconsistent readings	Movement or improper cuff placement	Rest 5 min; ensure proper cuff position at heart level.
Memory not storing	Memory full	Clear memory for current user.
Irregular heartbeat symbol frequent	Possible arrhythmia	Consult your physician.

Reset: Remove batteries for 1 minute to reset device.

Service: For technical support, contact Microlife customer service or authorized dealer.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-199 beats per minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
Cuff Size: 22-42 cm (8.7-16.5 inches)
Memory: 2 users x 99 measurements
Power Source: 4 x AA batteries or AC adapter (optional)
Operating Conditions: 10°C to 40°C, 15% to 90% RH
Dimensions: Main unit: 135 x 105 x 65 mm
Weight: Approx. 350g (without batteries)