Microlife BP B3 BT Blood Pressure Monitor User Manual

The Microlife BP B3 BT is a clinically validated, upper-arm blood pressure monitor with Bluetooth connectivity, featuring the patented Microlife Average Mode (MAM) for accurate measurement, irregular heartbeat detection, hypertension indicator, large LCD display with backlight, memory storage for multiple users, and cuff positioning guidance. Powered by 4xAA batteries or optional AC adapter. Below are key sections for safety, features, setup, measurement, data management, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with D-ring, Air tube, 4xAA batteries, User manual, Quick start guide.

Safety Information

Read all instructions before use. For accurate measurements and safe operation.

1. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other cardiovascular conditions.
2. Do not use on infants, children, or persons unable to express themselves.
3. Do not use while moving, talking, or immediately after exercise, eating, or bathing.
4. Ensure cuff is at heart level during measurement.

WARNING! This device is not a substitute for professional medical diagnosis. Do not adjust medications based on readings without consulting your doctor.

Package Contents

Unpack and verify all components are present.

• Microlife BP B3 BT Monitor: 1 unit
• Arm Cuff (22-42 cm): 1 piece
• Air Tube: 1 piece (pre-connected)
• AA Batteries: 4 pieces
• Quick Start Guide: 1 piece
• User Manual: 1 piece
• Storage Case: 1 piece

NOTE: Contact retailer if any items are missing or damaged.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER button, Bluetooth button, LCD display. Cuff: D-ring fastener, artery marker, air tube connector.

Display Symbols: User icon (1/2), Memory icon, Bluetooth icon, Battery indicator, Heart symbol with exclamation (irregular heartbeat), WHO color bar, Systolic/Diastolic readings, Pulse rate, Date/Time.

Buttons: START/STOP (begin/end measurement), MEMORY (review stored data), USER (switch between users 1 and 2), Bluetooth (activate pairing mode).

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Connect cuff: Ensure air tube is firmly connected to monitor.
4. Power test: Press START/STOP briefly to verify display activates.

CAUTION! Use only recommended batteries. Do not mix old and new batteries.

Taking a Measurement

For accurate results, follow these steps carefully.

1. Sit comfortably: Rest for 5 minutes with feet flat on floor, back supported.
2. Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.
3. Position arm: Keep cuff at heart level, relax arm on table.
4. Start measurement: Press START/STOP, remain still and quiet during inflation/deflation.
5. Read results: Systolic, diastolic, pulse appear on display. WHO bar shows category.
6. For MAM mode: Device automatically takes 3 readings with 30-second pauses, then displays average.

Tip: Take measurements at same time each day for consistent tracking.

Bluetooth & App Connectivity

Sync data with Microlife Connected Health app (iOS/Android).

1. Download app: Search "Microlife Connected Health" in App Store or Google Play.
2. Enable Bluetooth: On smartphone, turn Bluetooth ON.
3. Pair device: Press Bluetooth button on monitor until icon flashes, select "BP B3 BT" in app.
4. Transfer data: Measurements automatically sync to app after each reading.
5. View trends: App displays graphs, averages, and allows data sharing with healthcare providers.

Note: Bluetooth range is approximately 10 meters (33 feet). Ensure no obstacles between devices.

Memory & Data Review

Store and review up to 99 readings per user.

1. Select user: Press USER button to choose User 1 or User 2 (icon shows on display).
2. View memory: Press MEMORY button to scroll through stored readings (oldest to newest).
3. Clear memory: In memory mode, press and hold MEMORY for 5 seconds to delete all readings for current user.
4. Average calculation: Device automatically calculates average of last 3 readings taken within 10 minutes.

Warning: Clearing memory is permanent. Sync to app first if you wish to preserve data.

Care & Maintenance

Proper care ensures longevity and accuracy.

• Cleaning: Wipe monitor and cuff with slightly damp cloth. Do not immerse in water.
• Storage: Keep in provided case away from extreme temperatures, humidity, and dust.
• Cuff care: Do not fold tightly or twist air tube. Replace cuff if damaged.
• Batteries: Replace when low battery icon appears. Remove if not used for extended period.

CAUTION! Do not use alcohol, solvents, or abrasive cleaners. Do not disassemble device.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-199 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Cuff Size: 22-42 cm (standard adult)
• Memory: 99 readings x 2 users
• Bluetooth: Version 4.0, low energy
• Power Supply: 4xAA batteries or 6V DC adapter (optional)
• Battery Life: Approx. 500 measurements
• Dimensions: 135mm x 105mm x 65mm (monitor only)
• Weight: 300g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% humidity

Troubleshooting

Reset: Remove batteries for 1 minute to reset device to factory settings.

Service: For technical support, contact Microlife Customer Service at 1-800-566-3456 or visit www.microlife.com