Microlife BP B6 Connect Blood Pressure Monitor User Manual

The Microlife BP B6 Connect is an upper arm blood pressure monitor with Bluetooth connectivity, featuring the patented Microlife Average Mode (MAM) for accurate measurement, a large backlit LCD display, irregular heartbeat detection, body movement detection, and a memory function for up to 200 readings. It is clinically validated for accuracy and designed for easy home use. Below are key sections for safety, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: Upper Arm Cuff with D-Ring, Main Unit with LCD Display, AC Adapter, Storage Case, and Quick Start Guide.

Safety Information

Read all instructions before use. This device is for personal home use only, not for professional medical diagnosis.

1. Consult your doctor before use if you have an arrhythmia, pre-eclampsia, or other cardiovascular conditions.
2. Do not use on infants, small children, or persons who cannot express themselves.
3. Do not use the device on an injured or IV arm.
4. Ensure the cuff is the correct size for your arm circumference (22-42 cm).
5. Do not inflate the cuff when it is not wrapped around your arm.

WARNING! Do not modify the device. Use only the provided AC adapter. Keep away from children and pets.

Package Contents

• Microlife BP B6 Connect Blood Pressure Monitor (Main Unit)
• Upper Arm Cuff (22-42 cm) with D-Ring and tube
• AC Adapter (Model: XXXXX)
• Storage Case
• Quick Start Guide
• Warranty Card

CAUTION! Inspect all contents upon unboxing. Do not use if any parts are damaged.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 200 readings for 2 users
• Connectivity: Bluetooth 4.0
• Power Supply: 4 x AA batteries (1.5V) or AC adapter (6V DC)
• Display: LCD with backlight
• Cuff Size: 22-42 cm (fits standard and large adult arms)
• Operating Conditions: 10°C to 40°C, 15% to 90% relative humidity (non-condensing)
• Storage Conditions: -20°C to +60°C, max. 95% relative humidity

Device Overview

Front Panel: START/STOP Button, M (Memory) Button, User Button (1/2), Bluetooth Button, LCD Display.

Display Symbols: Systolic/Diastolic Pressure, Pulse Rate, Battery Indicator, Bluetooth Icon, User Icon (1/2), WHO Indicator Bar, Irregular Heartbeat Symbol ( ), Movement Symbol, Cuff Fit Symbol, MAM Symbol, Date/Time.

Side/Back: Cuff Socket, AC Adapter Socket, Battery Compartment.

Initial Setup

Before first use, install batteries or connect the AC adapter, set the date/time, and pair with the app.

1. Power: Insert 4 AA batteries or plug in the AC adapter.
2. Date & Time: Press and hold the M button for 3 seconds. Use START/STOP to adjust values, press M to confirm.
3. User Selection: Press the User button to select User 1 or User 2 for separate memory storage.
4. Cuff Application: Place cuff on bare upper arm 1-2 cm above elbow. Ensure tube runs down the center of your arm. Secure with the D-Ring.

Tip: Rest for 5 minutes before your first measurement. Sit in a quiet chair with feet flat on the floor.

Taking a Measurement

For the most accurate reading, follow these steps carefully.

1. Sit comfortably with back supported and legs uncrossed.
2. Wrap the cuff correctly on your left arm (unless instructed otherwise by your doctor).
3. Rest your arm on a table so the cuff is at heart level.
4. Press the START/STOP button. The device will inflate automatically.
5. Remain still and quiet until the measurement is complete and the cuff deflates.
6. Your systolic, diastolic pressure, and pulse rate will display. The WHO bar will show your category.
7. For MAM mode, the device will automatically take two more readings after a short pause and display the average.
8. To turn off the device, press START/STOP again, or it will power off automatically.

WARNING! Do not move or talk during measurement. An incorrect cuff position will give false readings.

Using the Microlife Connect App

The app provides tracking, trends, and sharing features.

1. Download the free "Microlife Connect" app from the Apple App Store or Google Play Store.
2. Enable Bluetooth on your smartphone.
3. On the monitor, press the Bluetooth button. The Bluetooth icon ( ) will flash.
4. Open the app and follow the on-screen instructions to pair the device.
5. After pairing, future measurements will automatically sync to the app when the monitor is near your phone and Bluetooth is on.
6. Use the app to view history charts, set reminders, and export data for your doctor.

Note: The app is compatible with iOS and Android. Check the Microlife website for specific version requirements.

Understanding Your Results

Refer to the WHO Indicator on the display and consult the table below. Always discuss your readings with a healthcare professional.

Symbols: (Irregular Heartbeat Detected) - Consult your doctor if this appears frequently. (Body Movement) - Repeat measurement while keeping still.

Care & Maintenance

Unplug the AC adapter and remove batteries before cleaning.

1. Cleaning: Wipe the main unit and cuff with a soft, slightly damp cloth. Do not immerse in water or use abrasive cleaners.
2. Storage: Store in the provided case in a cool, dry place. Do not bend the tube sharply.
3. Batteries: Replace batteries when the low battery icon appears. Use alkaline batteries for best performance.
4. Cuff: The cuff contains a sensitive sensor. Do not wash it. If damaged, contact Microlife for a replacement.

CAUTION! Never attempt to repair the device yourself. There are no user-serviceable parts inside.

Troubleshooting

Reset: To reset the device to factory settings, remove all batteries, wait 2 minutes, and reinsert.

Service: For technical support, visit www.microlife.com or contact your local Microlife service center. Do not open the device.