Microlife BP Basic Blood Pressure Monitor User Manual

The Microlife BP Basic is a fully automatic upper arm blood pressure monitor designed for easy, accurate home use. It features one-touch operation, a large LCD display with clear symbols, irregular heartbeat detection, 30 memory slots for two users, WHO blood pressure classification indicator, and average value calculation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Device Overview 5. Setting Up the Monitor 6. Taking a Measurement 7. Understanding Results 8. Memory Function 9. Battery & Power 10. Care & Cleaning 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Upper arm cuff with D-ring, Air tube, 4x AA batteries, Instruction manual, Storage case.

Feature	Description
Fully Automatic Operation	One-button measurement with automatic inflation and deflation
WHO Indicator	Color-coded bar graph shows classification of your result
Irregular Heartbeat Detection	Detects pulse irregularities during measurement
30 Memory x 2 Users	Stores 30 measurements for each of two users
Average Value	Calculates average of last 3 measurements taken within 10 minutes
Large LCD Display	Easy-to-read numbers and symbols
Automatic Power Off	Conserves battery life
Cuff Fit Indicator	Verifies proper cuff placement
Date & Time Stamp	Records measurement time with memory function
Error Detection	Alerts user to movement or incorrect cuff application

Safety Information

Read all instructions before use. For home use only.

Do not use on infants, small children, or persons who cannot express themselves.
Consult your physician before use if you have arrhythmia, blood circulation problems, or other serious conditions.
Do not use the monitor on an injured or sore arm.
Do not modify or disassemble the device.
Keep away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your doctor about your blood pressure.

Package Contents

Microlife BP Basic Monitor: 1 unit
Upper Arm Cuff: 22-32 cm (standard size)
Air Tube: Pre-connected to cuff
AA Batteries: 4 pieces (for initial use)
Instruction Manual: This document
Storage Case: For device and accessories
Quick Start Guide: Brief instructions

NOTE: Check all items upon unboxing. Contact retailer if anything is missing or damaged.

Device Overview

Front Panel: START/STOP button, Memory button, User button (1/2), LCD display.

Display Symbols: Systolic/Diastolic pressure, Pulse rate, User indicator (1/2), Memory indicator, Battery indicator, WHO classification bar, Irregular heartbeat symbol, Cuff fit indicator, Error symbol, Date/Time.

Connections: Air tube socket on left side of monitor.

Battery Compartment: Located on back of device.

Setting Up the Monitor

Prepare the device for first use.

Insert batteries: Open battery compartment on back, insert 4 AA batteries observing correct polarity.
Connect cuff: Plug air tube firmly into socket on left side of monitor.
Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust values.
Select user: Press USER button to select User 1 or User 2 for memory storage.

CAUTION! Use only recommended batteries. Do not mix old and new batteries.

Taking a Measurement

For accurate results, follow these steps carefully.

Rest for 5 minutes before measuring. Avoid eating, smoking, or exercising 30 minutes prior.
Sit comfortably with back supported and feet flat on floor.
Place cuff on bare upper arm 1-2 cm above elbow. Tube should run down center of arm.
Secure cuff snugly using D-ring (not too tight). Cuff fit indicator should show OK symbol.
Position arm so cuff is at heart level. Rest arm on table.
Press START/STOP button. Device will inflate automatically.
Remain still and quiet during measurement.
Results display automatically with systolic, diastolic, and pulse rate.
Device deflates and turns off automatically after 1 minute.

Tip: Take measurements at the same time each day for consistent tracking.

Understanding Results

The display shows systolic pressure (top number), diastolic pressure (middle number), and pulse rate (bottom number).

WHO Classification	Systolic (mmHg)	Diastolic (mmHg)	Display Color
Low	< 90	< 60	Blue
Ideal	90-119	60-79	Green
Normal	120-129	80-84	Yellow
High Normal	130-139	85-89	Orange
Hypertension	≥ 140	≥ 90	Red

Irregular Heartbeat Symbol: Appears if irregular pulse is detected during measurement. Consult your physician if this appears frequently.

Average Value: When three measurements are taken within 10 minutes, the average of the last three displays briefly after the third result.

Memory Function

Stores 30 measurements for each of two users.

Select user: Press USER button to choose User 1 or User 2.
View memory: Press MEMORY button once to see last measurement. Press again to scroll through stored values.
Clear memory: Press and hold USER and MEMORY buttons simultaneously for 3 seconds to clear all memory for current user.
Memory full: When 30 measurements are stored, oldest entry is automatically deleted when new one is added.

NOTE: Memory is preserved when batteries are changed if done within 3 minutes.

Battery & Power

Battery Type: 4 x AA alkaline batteries (LR6)
Battery Life: Approximately 500 measurements
Low Battery Indicator: Empty battery symbol appears when replacement needed
Automatic Shut-off: After 1 minute of inactivity
AC Adapter: Optional (Model AD-02, not included)

WARNING! Remove batteries if device will not be used for extended period. Do not use rechargeable batteries unless specified.

Care & Cleaning

Unplug air tube and remove batteries before cleaning.

Wipe monitor with slightly damp cloth. Do not immerse in water.
Clean cuff with mild soap and damp cloth. Do not machine wash.
Store in provided case in cool, dry place away from direct sunlight.
Avoid extreme temperatures, humidity, dust, and strong magnetic fields.

CAUTION! Do not use alcohol, benzene, thinners, or abrasive cleaners. Never wash cuff in washing machine.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with new ones.
Error symbol (E)	Cuff not attached properly	Check air tube connection; reattach cuff correctly.
Inaccurate reading	Improper positioning	Ensure cuff at heart level; sit still during measurement.
Irregular heartbeat symbol	Pulse irregularity detected	Remain still; repeat measurement. Consult doctor if frequent.
Cuff won't inflate	Air leak or blockage	Check tube for kinks; ensure connection is tight.
Memory not working	Wrong user selected	Press USER button to select correct user profile.

Reset: Remove batteries for 3 minutes, then reinsert to reset device.

Service: For technical support, contact Microlife Customer Service at 1-800-435-XXXX or visit www.microlife.com