Microlife BP W10 Blood Pressure Monitor User Manual

The Microlife BP W10 is an upper arm digital blood pressure monitor designed for home use. It features one-touch operation, a large LCD display, irregular heartbeat detection, 2-user memory with 99 readings each, WHO blood pressure classification indicator, adjustable cuff, and automatic power-off. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, adjustable upper arm cuff, air tube, instruction manual, storage case, and batteries.

Safety Information

Read all instructions before use. Consult your physician for proper blood pressure monitoring.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during physical activity or immediately after exercise.
3. Do not wrap cuff over clothing; use on bare arm only.
4. Do not use if device or cuff is damaged.
5. This device is for home use only, not for professional medical diagnosis.

WARNING! Persons with severe circulation disorders or arrhythmias should consult a physician before use. Do not over-inflate cuff.

Package Contents

Unpack and verify all components are present.

• Microlife BP W10 Monitor: 1 unit
• Adjustable Upper Arm Cuff: 1 piece (22-42 cm)
• Air Tube: 1 piece (pre-connected)
• Instruction Manual: 1 copy
• Storage Case: 1 piece
• AA Batteries: 4 pieces (installed)
• Warranty Card: 1 copy

CAUTION! Keep packaging materials away from children to prevent suffocation.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER 1/USER 2 selector, LCD display. Cuff: Velcro closure, artery marker, air tube connector.

LCD Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, User indicator, Memory full, Low battery, Irregular heartbeat symbol, WHO classification bar, Date and time, Error indicator.

Buttons: START/STOP (begins measurement), MEMORY (recalls stored readings), USER (selects between two user profiles).

Before First Use

Prepare device for initial measurement.

1. Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Select user: Press USER button to choose User 1 or User 2.
4. Apply cuff properly: Position artery marker over brachial artery on bare arm.

Tip: Rest for 5 minutes before first measurement. Avoid caffeine, smoking, or exercise 30 minutes prior.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably with back supported and feet flat on floor.
2. Wrap cuff on left arm (unless instructed otherwise by physician).
3. Position cuff 2-3 cm above elbow with tube facing downward.
4. Rest arm on table with cuff at heart level.
5. Press START/STOP button; device will inflate automatically.
6. Remain still and quiet during measurement.
7. Reading displays with systolic/diastolic pressures and pulse rate.
8. Device deflates automatically; results are stored in memory.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accurate results.

Understanding Results

Blood Pressure Classification according to WHO guidelines:

Irregular Heartbeat Symbol: Appears if irregular heartbeat is detected during measurement. Consult physician if symbol appears frequently.

Memory Function

Stores 99 readings for each of two users with date and time.

1. Select user: Press USER button to choose User 1 or User 2.
2. View memory: Press MEMORY button to scroll through stored readings.
3. Clear memory: Press and hold MEMORY button for 5 seconds while in memory mode.
4. Memory full: Symbol appears when 99 readings stored; old readings are overwritten.

Tip: Regular tracking helps physician assess blood pressure patterns over time.

Care & Maintenance

Clean device with soft, dry cloth only. Do not immerse in water or use chemicals.

1. Remove batteries if device not used for extended period.
2. Store in provided case in cool, dry place away from direct sunlight.
3. Clean cuff with damp cloth and mild detergent if soiled; air dry completely.
4. Do not fold air tube sharply or pull on connections.

CAUTION! Do not disassemble device. No user-serviceable parts inside.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-199 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Cuff Size: 22-42 cm (8.7-16.5 inches)
• Memory: 2 users x 99 readings
• Power Supply: 4 x 1.5V AA batteries or AC adapter (optional)
• Battery Life: Approximately 500 measurements
• Dimensions: 135 x 105 x 65 mm (main unit)
• Weight: 350 g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% humidity

Troubleshooting

Reset: Remove batteries for 1 minute to reset device.

Service: For technical support, contact Microlife Customer Service at 1-800-435-XXXX or visit www.microlife.com