Microlife BP W2 Slim Blood Pressure Monitor User Manual

The Microlife BP W2 Slim is a clinically validated, fully automatic upper arm blood pressure monitor with SlimFit cuff technology for comfortable measurement, irregular heartbeat detection, hypertension indicator, 2-user memory with 99 readings each, date and time display, WHO classification indicator, and one-touch operation. Powered by 4xAA batteries or optional AC adapter. Below are key sections for safety, features, setup, measurement, memory functions, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, SlimFit cuff (22-42 cm), AC adapter port, battery compartment, START/STOP button, MEMORY button.

Safety Information

Important safety precautions for proper use.

1. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other medical conditions.
2. Do not use on infants, small children, or persons unable to express themselves.
3. Do not use while connected to high-frequency surgical equipment or MRI devices.
4. Measure at the same time each day for consistent results.
5. Rest for 5 minutes before measuring; avoid eating, smoking, or exercising 30 minutes prior.

WARNING! This device is for home use only, not for professional medical diagnosis. Always follow your doctor's instructions.

Package Contents

Unpack and verify all components are present.

• Microlife BP W2 Slim Monitor (1 unit)
• SlimFit Upper Arm Cuff (22-42 cm) (1 piece)
• Instruction Manual (this document)
• Quick Start Guide (1 sheet)
• Storage Case (1 piece)
• Warranty Card (1 piece)

Note: Batteries and AC adapter are not included in standard package.

Device Overview

Familiarize yourself with the device components and display symbols.

Front Panel: LCD display, START/STOP button, MEMORY button.

Display Symbols: User indicator (U1/U2), battery icon, memory full icon, irregular heartbeat symbol, WHO classification colors (green/yellow/red), systolic/diastolic pressure, pulse rate, date and time.

Connections: Cuff tube connector, AC adapter port (DC 6V), battery compartment cover.

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4xAA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
3. Attach cuff: Connect cuff tube to device connector until it clicks.
4. Select user: Press MEMORY button to toggle between User 1 (U1) and User 2 (U2).

CAUTION! Use only recommended batteries or AC adapter. Do not mix old and new batteries.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably with back supported and feet flat on floor.
2. Wrap cuff on bare upper arm 1-2 cm above elbow, aligning artery marker with brachial artery.
3. Rest arm on table with cuff at heart level.
4. Press START/STOP button - device inflates automatically.
5. Remain still and quiet during measurement.
6. Results display with systolic, diastolic, pulse rate, and WHO classification.
7. Device deflates automatically; note reading for your records.

Tip: Take 2-3 readings with 1-minute intervals for most accurate average.

Memory & Data Management

Store and review measurements.

1. Select user: Press MEMORY to choose U1 or U2 before measurement.
2. View memory: Press MEMORY after device is on (but before START) to scroll through stored readings.
3. Clear memory: Press and hold MEMORY for 5 seconds while in memory mode to delete current user's data.
4. Memory full: When 99 readings stored, oldest reading is automatically overwritten.

Note: Each user's memory is independent; switching users does not affect other's data.

Understanding Results

Interpret your blood pressure readings.

Irregular Heartbeat Symbol: Appears if irregular pulse detected during measurement. Consult physician if frequent.

Care & Maintenance

Proper care ensures long device life.

1. Clean device with soft, dry cloth only; no liquids or chemicals.
2. Store in provided case in cool, dry place away from direct sunlight.
3. Remove batteries if not using for extended period (more than 3 months).
4. Replace batteries when low battery icon appears.
5. Do not disassemble device; no user-serviceable parts inside.

CAUTION! Do not immerse device in water. Do not use near flammable gases.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Cuff Size: 22-42 cm (SlimFit technology)
• Memory: 2 users x 99 readings with date/time
• Power Supply: 4xAA batteries or DC 6V adapter
• Battery Life: Approximately 500 measurements
• Dimensions: 128mm x 105mm x 65mm
• Weight: 300g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% RH
• Certifications: CE, FDA cleared, clinically validated

Troubleshooting

Reset: Remove batteries for 1 minute to reset device to factory settings (memory preserved).

Service: For technical support, contact Microlife Customer Service at 1-800-435-XXXX or visit www.microlife.com