Microlife BP3AJ1-7A Blood Pressure Monitor User Manual

The Microlife BP3AJ1-7A is an upper arm blood pressure monitor with advanced features for accurate and convenient home monitoring. It utilizes Microlife's patented AFIB detection technology, features a large LCD display with backlight, memory storage for multiple users, irregular heartbeat detection, WHO indicator, and one-touch operation. Below are key sections for safety, features, setup, operation, and maintenance.

Features at a Glance

Key components: Main unit with LCD display, Upper Arm Cuff, AC Adapter, Storage Case, Instruction Manual.

Safety Information

Read all instructions before use. For accurate measurements and safe operation.

1. Do not use on infants, children, or persons unable to express their will.
2. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use the monitor on an injured or sore arm.
4. Do not use the monitor near strong electromagnetic fields (e.g., microwave ovens, mobile phones).
5. Use only the specified AC adapter or recommended batteries.

WARNING! This device is for home use only and is not a substitute for professional medical diagnosis. Always consult your physician for interpretation of results.

Package Contents

Unpack and verify all components are present.

• Microlife BP3AJ1-7A Monitor (1 unit)
• Upper Arm Cuff (22-42 cm) (1 unit)
• AC Adapter (1 unit)
• Storage Case (1 unit)
• Instruction Manual (1 copy)
• Warranty Card (1 copy)

CAUTION! Do not use if any components are damaged. Contact customer service for replacement.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 99 measurements x 2 users
• Cuff Size: 22-42 cm (upper arm circumference)
• Power Supply: 4 x 1.5V AA batteries or AC adapter (6V DC, 500mA)
• Display: LCD with backlight
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: ≤85% RH
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: ≤93% RH
• Dimensions: Approx. 135mm (W) x 105mm (H) x 70mm (D)
• Weight: Approx. 350g (without batteries)

Device Overview

Front Panel: LCD Display, START/STOP Button, Memory (M) Button, User Selection Button (1/2).

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, User Indicator (1/2), Battery Indicator, AFIB Symbol, Irregular Heartbeat Symbol, WHO Indicator Bar, Date/Time, Memory Number, Average Value Icon.

Connections: Cuff Port, DC Input (for AC adapter).

Initial Setup

Before first use: Install batteries or connect AC adapter, set date and time.

1. Battery Installation: Open battery compartment, insert 4 AA batteries observing polarity.
2. AC Adapter: Plug adapter into DC input on monitor, then into wall outlet.
3. Date/Time Setting: Press and hold M button for 3 seconds. Use START/STOP to adjust values, M to confirm and move to next setting.
4. Cuff Connection: Plug cuff tube firmly into the cuff port on the monitor.

Tip: For most accurate results, use AC adapter or fresh alkaline batteries.

Taking a Measurement

For reliable results: Rest for 5 minutes before measuring, avoid eating, smoking, or exercising 30 minutes prior.

1. Sit correctly: Sit on a chair with back support, feet flat on floor, legs uncrossed.
2. Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow. Ensure tube runs down center of arm.
3. Position arm: Rest arm on table with cuff at heart level. Relax palm upward.
4. Select user: Press User button to select User 1 or User 2.
5. Start measurement: Press START/STOP button. Cuff will inflate automatically.
6. Remain still: Do not move or talk during measurement.
7. Read results: Measurement completes when cuff deflates. Results display with WHO indicator.
8. Power off: Monitor turns off automatically after 1 minute.

WARNING! Do not inflate cuff when not wrapped around arm. Do not overtighten.

Understanding Results

Systolic Pressure (higher number), Diastolic Pressure (lower number), Pulse Rate (beats per minute).

Symbols: AFIB symbol appears if atrial fibrillation is detected. Irregular Heartbeat symbol appears if irregular pulse is detected during measurement. Consult your physician if these symbols appear frequently.

Memory Function

Stores up to 99 measurements for each of two users with date and time stamp.

1. View memory: Press M button to enter memory mode. Display shows latest measurement.
2. Scroll: Press START/STOP to scroll through stored measurements.
3. View average: After scrolling through all measurements, average of last three appears.
4. Switch users: Press User button to view memory for other user.
5. Exit memory: Press M button again or wait 1 minute for auto shut-off.

Note: Memory is preserved when batteries are removed if changed within 3 minutes.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning.

1. Clean monitor: Use slightly damp cloth with mild detergent. Do not immerse in water.
2. Clean cuff: Wipe with damp cloth. Do not wash or iron.
3. Storage: Store in provided case in cool, dry place away from direct sunlight.
4. Batteries: Replace when battery symbol appears. Remove if not using for extended period.
5. Cuff inspection: Check for cracks or leaks periodically.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble the monitor.

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute, then reinsert.

Service: For technical support, contact Microlife Customer Service at 1-800-566-0456 or visit www.microlife.com