Microlife BP3AQ1-1 Blood Pressure Monitor User Manual

The Microlife BP3AQ1-1 is an upper arm blood pressure monitor featuring Microlife's patented AFIB detection technology, which can screen for atrial fibrillation during measurement. It offers one-touch operation, a large LCD display with backlight, memory storage for multiple users, irregular heartbeat detection, WHO blood pressure classification indicator, and an adjustable cuff. Below are key sections for safety, features, setup, measurement, memory functions, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Adjustable upper arm cuff, AC adapter port, Memory function buttons, START/STOP button.

Safety Information

Read all instructions before use. For accurate measurements and safe operation:

1. Do not use on infants, children, or persons who cannot express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or arteriosclerosis.
3. Do not use during or immediately after physical exercise.
4. Do not use on injured or sore arms.
5. Keep device away from children.

WARNING! This device is for home use only, not for professional medical diagnosis. Consult your physician for medical advice.

Package Contents

Unpack and verify all components are present.

• Main Unit: Blood pressure monitor with display
• Upper Arm Cuff: Adjustable with Velcro closure
• AC Adapter: For powering the device (optional)
• User Manual: This document
• Storage Case: For device protection and portability

CAUTION! Do not use if any components are damaged. Contact customer service for replacement.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button, USER button, SET button.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, AFIB symbol, Irregular heartbeat symbol, WHO indicator, User indicator, Memory full indicator, Battery indicator, Date/Time.

Side/Back: AC adapter port, Cuff connector, Battery compartment.

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press SET button, use START/STOP to adjust values.
3. Connect cuff: Plug cuff tube into connector on side of unit.
4. Test operation: Press START/STOP to ensure device powers on.

Tip: For most accurate results, use AC adapter instead of batteries.

Taking a Measurement

For accurate readings, follow these steps carefully.

1. Sit comfortably with back supported and feet flat on floor.
2. Rest for 5 minutes before measuring.
3. Wrap cuff on bare upper arm 1-2 cm above elbow.
4. Position cuff at heart level.
5. Press START/STOP button to begin measurement.
6. Remain still and quiet during inflation and measurement.
7. Read results on display when measurement completes.
8. Press START/STOP to turn off device or wait for auto power-off.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accurate results.

Understanding Results

The display shows systolic pressure, diastolic pressure, and pulse rate.

Note: AFIB detection is a screening tool, not a diagnosis. Always consult your physician.

Memory Function

Store and review measurements for two users.

1. Select user: Press USER button to toggle between User 1 and User 2.
2. View memory: Press MEMORY button to scroll through stored readings.
3. View average: Hold MEMORY button for 3 seconds to see average of last 3 readings.
4. Clear memory: In memory mode, hold SET button for 5 seconds to clear current user's memory.

Tip: Take measurements at the same time each day for consistent tracking.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

• Clean cuff with mild soap and damp cloth only; do not immerse in water.
• Clean device with dry soft cloth; do not use solvents or abrasives.
• Store in provided case in cool, dry place.
• Remove batteries if device will not be used for extended period.
• Replace batteries when low battery symbol appears.

CAUTION! Do not wash cuff in washing machine. Do not expose device to extreme temperatures or humidity.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (8.7-16.5 inches)
• Memory: 99 readings per user (2 users total)
• Power Supply: 4 x AA batteries or AC adapter (6V DC)
• Operating Conditions: 10°C to 40°C, 15% to 90% humidity
• Dimensions: 123mm (W) x 98mm (H) x 141mm (D)
• Weight: Approximately 350g (without batteries)

Troubleshooting

Reset: Remove batteries for 5 minutes to reset device.

Service: For technical support, contact Microlife customer service or visit www.microlife.com