Microlife BP3GT1-6B Blood Pressure Monitor User Manual

The Microlife BP3GT1-6B is an automatic upper arm blood pressure monitor with advanced features for accurate home measurement. It utilizes Microlife's patented AFIB (Atrial Fibrillation) detection technology, has a large memory capacity for multiple users, features an irregular heartbeat detector, includes a risk category indicator based on WHO classification, and offers one-touch operation with automatic inflation and deflation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Upper Arm Cuff, AC Adapter (optional), Instruction Manual, Storage Case.

Safety Information

Read all instructions before use. For home use only.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or arteriosclerosis.
3. Do not use during or immediately after physical exercise.
4. Wait at least 5 minutes between measurements on the same person.
5. Do not use in high humidity, near flammable gas, or in MRI/CT scan environments.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your physician for interpretation of results.

Package Contents

• Microlife BP3GT1-6B Monitor: 1 unit
• Upper Arm Cuff (22-42 cm): 1 piece
• Instruction Manual: 1 copy
• Storage Case: 1 piece
• Warranty Card: 1 copy
• 4 x AA Batteries: (Optional: AC Adapter sold separately)

CAUTION! Check all contents upon unboxing. Do not use if any parts are damaged or missing.

Device Overview

Front Panel: LCD Display, START/STOP Button, MEMORY Button, USER Button, DATE/TIME Button.

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, User Indicator (1/2), Memory Full, Battery Low, AFIB Symbol, Irregular Heartbeat Symbol, WHO Indicator Bars, Date/Time, Average Value.

Cuff: Arrow marking for artery positioning, D-ring closure, air tube connector.

Initial Setup

Before first use: Install batteries and set date/time.

1. Open battery compartment on back of unit; insert 4 AA batteries observing polarity.
2. Press any button to activate display.
3. Press and hold DATE/TIME button for 3 seconds to enter setting mode.
4. Use START/STOP to change values; MEMORY to confirm and move to next setting.
5. Select user: Press USER button to choose User 1 or User 2.
6. Apply cuff correctly: Wrap around bare upper arm with arrow over brachial artery.

Tip: Rest for 5 minutes before first measurement. Sit comfortably with feet flat on floor.

Taking a Measurement

For most accurate results, measure at the same time each day.

1. Sit comfortably with back supported and feet flat on floor.
2. Apply cuff to left upper arm (unless instructed otherwise by physician).
3. Position cuff 1-2 cm above elbow with artery marker aligned with brachial artery.
4. Rest arm on table with cuff at heart level.
5. Press START/STOP button - unit will inflate automatically.
6. Remain still and quiet during measurement.
7. Results display automatically with systolic, diastolic, and pulse rate.
8. Unit automatically deflates and stores reading in memory.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level.

Memory Function

Stores 99 readings for each of 2 users with date/time stamp.

1. Press MEMORY button to review stored readings.
2. Use START/STOP to scroll through readings.
3. Press and hold MEMORY for 3 seconds to delete all readings for current user.
4. Average function: Automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory full icon appears when 99 readings are stored. Delete old readings to store new ones.

Understanding Results

WHO Classification Color Bars:

AFIB Symbol: Appears if atrial fibrillation is detected during measurement. Consult physician if this appears.

Irregular Heartbeat Symbol: Appears if irregular heartbeat is detected. May require multiple measurements.

Care & Maintenance

Clean with soft, dry cloth only. Do not immerse in water or use chemicals.

1. Remove batteries if not using for extended period.
2. Store in provided case in cool, dry place.
3. Clean cuff with mild soap and damp cloth if necessary; air dry completely.
4. Do not expose to extreme temperatures, humidity, or direct sunlight.

CAUTION! Do not disassemble or attempt repairs. No user-serviceable parts inside.

Battery Information

• Battery Type: 4 x AA alkaline batteries (LR6)
• Battery Life: Approximately 500 measurements
• Low Battery Indicator: Symbol appears when replacement needed
• Optional Power: AC Adapter 6V DC, 500mA (Model AD-6B)

Important: Replace all batteries at same time. Do not mix old and new batteries or different types.

Troubleshooting

Reset: Remove batteries for 1 minute to reset device.

Service: For technical support, contact Microlife Customer Service at 1-888-396-6553 or visit www.microlife.com