Microlife BP3GX1-3BPBX Blood Pressure Monitor User Manual

The Microlife BP3GX1-3BPBX is an upper arm blood pressure monitor featuring clinically validated accuracy, one-touch operation, irregular heartbeat detection, hypertension indicator, 2-user memory with 99 readings each, date/time display, automatic averaging of the last 3 readings, WHO classification indicator, and a large, easy-to-read LCD display. It includes a standard cuff (22-32 cm), AC adapter, and storage case. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Standard arm cuff, AC adapter, Storage case, User manual.

Safety Information

Read all instructions before use. For personal home use only.

1. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other cardiovascular conditions.
2. Do not use on infants, children, or persons unable to express themselves.
3. Do not use the monitor while connected to other medical electronic equipment (e.g., ECG).
4. Ensure the cuff is the correct size for your arm circumference (22-32 cm).
5. Do not inflate the cuff when it is not wrapped around your arm.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your doctor for interpretation of readings.

Package Contents

• Microlife BP3GX1-3BPBX Blood Pressure Monitor (Main Unit)
• Standard Arm Cuff (22-32 cm / 8.7"-12.6")
• AC Adapter (Model: AS-40-090100-UK or equivalent)
• Storage Case
• User Manual (this document)
• 4 x AA Batteries (may vary by region)

CAUTION! Inspect all contents upon unpacking. Do not use if any part appears damaged.

Device Overview

Front Panel (LCD Display): Shows systolic/diastolic pressure, pulse rate, user icon, memory index, date/time, battery indicator, WHO bar graph, and warning symbols (IHD, hypertension).

Control Buttons:
START/STOP: Initiates and stops measurement.
M: Memory recall button. Press to review stored readings.
USER (U1/U2): Selects between User 1 and User 2 memory profiles.
SET: Used to set date, time, and user profile (hold for 3 seconds).

Cuff & Hose: Connects to the left side of the main unit. The cuff has a Velcro closure and an artery marker.

Initial Setup

Before first use, install batteries or connect the AC adapter.

1. Power Source: Insert 4 AA batteries (observe polarity) or plug in the AC adapter.
2. Set Date & Time: Hold the SET button for 3 seconds. Use START/STOP to adjust values and M to confirm/save.
3. Select User: Press the USER button to select U1 or U2. The corresponding icon will appear on the display.
4. Cuff Application: Place cuff on bare left upper arm. The hose should run down the inner arm, aligned with the middle finger. Secure snugly with Velcro.

Tip: For most accurate results, rest for 5 minutes before measuring. Avoid talking or moving during measurement.

Taking a Measurement

Follow these steps for a reliable reading.

1. Sit comfortably on a chair with back support. Feet flat on the floor.
2. Place your left arm on a table so the cuff is at heart level.
3. Wrap the cuff correctly (see Initial Setup).
4. Press the START/STOP button. The cuff will inflate automatically.
5. Remain still and quiet. The monitor will display your pulse during measurement.
6. The cuff will deflate automatically. Your systolic, diastolic pressure, and pulse rate will be displayed.
7. The reading is automatically saved to the selected user's memory.
8. To take another reading, wait at least 3 minutes before repeating the process.

WARNING! Do not inflate the cuff more than once within a 3-minute interval to ensure accuracy and comfort.

Understanding Results

The display shows key information and indicators.

• Systolic Pressure: Top number (e.g., 120).
• Diastolic Pressure: Bottom number (e.g., 80).
• Pulse Rate: Beats per minute (e.g., 72).
• WHO Bar Graph: Color-coded indicator (Green=Optimal, Yellow=Normal/High-Normal, Red=Hypertension).
• Irregular Heartbeat Symbol (IHD): Flashes if an irregular rhythm is detected during measurement. Consult your doctor if this appears frequently.
• Hypertension Indicator: A heart symbol flashes if systolic pressure ≥ 135 mmHg or diastolic ≥ 85 mmHg.
• User Icon (U1/U2): Indicates which user profile is active.
• Memory Index: Shows the position of the current reading in memory (e.g., 01-99).

Memory Function

The monitor stores 99 readings for each of the two users.

1. Viewing Memory: Press the M button. The most recent reading appears. Press M repeatedly to scroll through older readings.
2. Automatic Averaging: When three consecutive readings are taken within 10 minutes, the average of these three is automatically calculated and displayed briefly after the third reading.
3. Clearing Memory: To clear all readings for the current user, hold the M button for 5 seconds until "CLR" appears. Release to confirm.
4. Switching Users: Press the USER button to switch between U1 and U2 memory profiles.

Note: Memory is retained even when batteries are removed or replaced.

Care & Maintenance

Proper care ensures long device life and accurate readings.

• Cleaning: Wipe the monitor and cuff with a soft, slightly damp cloth. Do not immerse in water or use solvents.
• Storage: Store in the provided case in a cool, dry place away from direct sunlight and extreme temperatures.
• Cuff Care: Do not fold the cuff tightly or crease the hose. Periodically check the Velcro and fabric for wear.
• Batteries: Replace batteries when the low battery icon appears. Remove batteries if the device will not be used for an extended period.
• AC Adapter: Use only the specified Microlife AC adapter (AS-40-090100-UK).

CAUTION! Do not attempt to disassemble or repair the device. There are no user-serviceable parts inside.

Technical Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading
• Cuff Size: Standard: 22-32 cm (8.7"-12.6") arm circumference
• Memory: 2 x 99 readings with date and time stamp
• Power Supply: 4 x 1.5V AA batteries or DC 9V/1A AC adapter
• Operating Conditions: 10°C to 40°C (50°F to 104°F), 15% to 90% relative humidity (non-condensing)
• Dimensions (Main Unit): Approx. 123mm (W) x 98mm (H) x 141mm (D)
• Weight (without batteries): Approx. 300g
• Standards: ESH, AAMI, ISO 81060-2 validated

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute to perform a soft reset.

Service: For technical support or service, visit www.microlife.com or contact your local Microlife service center. Do not open the device.