Microlife BP3MY1-1P Blood Pressure Monitor User Manual

The Microlife BP3MY1-1P is an automatic upper-arm blood pressure monitor designed for home use. It features one-touch operation, a large LCD display with backlight, irregular heartbeat detection, 2-user memory with 99 measurements each, WHO blood pressure classification indicator, date and time display, automatic shut-off, and a standard cuff (22-32 cm). Powered by 4 AA batteries or optional AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with tube, AC adapter port (optional), Battery compartment, START/STOP button, MEMORY button.

Safety Information

Read all instructions before use. For accurate measurements and safe operation.

1. Do not use on infants, children, or persons unable to express themselves.
2. Consult physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use during physical activity or immediately after exercise.
4. Do not inflate cuff when not wrapped around arm.
5. Keep device away from electromagnetic fields (microwaves, mobile phones).

WARNING! This device is for home use only, not for professional medical diagnosis. Consult your doctor for medical interpretation of readings.

Package Contents

• Microlife BP3MY1-1P Blood Pressure Monitor (main unit)
• Standard arm cuff (22-32 cm circumference)
• Instruction manual
• Quick start guide
• Storage case

Note: Batteries and AC adapter are not included in standard package.

Device Overview

Front Panel: LCD display, START/STOP button, MEMORY button.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, User indicator (1/2), Memory full, Battery low, Irregular heartbeat, WHO classification, Date/Time, Average value.

Side/Back: AC adapter port, Battery compartment, Cuff connector.

Cuff: Velcro closure, air tube, artery marker.

Initial Setup

Before first use, install batteries and set date/time.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds until date flashes. Use START/STOP to adjust values, MEMORY to confirm and move to next setting.
3. Select user: Press MEMORY briefly to toggle between User 1 and User 2.
4. Cuff placement: Wrap cuff on bare upper arm, 1-2 cm above elbow. Align artery marker with brachial artery.

CAUTION! Use correct cuff size for accurate measurements. Cuff too loose or tight affects readings.

Taking a Measurement

For most accurate results, measure at same time each day.

1. Sit comfortably with back supported and feet flat on floor.
2. Rest for 5 minutes before measuring.
3. Wrap cuff correctly on left arm (unless instructed otherwise by doctor).
4. Position arm so cuff is at heart level.
5. Press START/STOP button. Device will inflate automatically.
6. Remain still and quiet during measurement.
7. Readings display when measurement complete. Device deflates automatically.
8. Note systolic, diastolic pressures and pulse rate.

Tip: Wait 2-3 minutes between consecutive measurements on same person.

Memory Function

Stores 99 measurements per user with date/time stamp.

1. View memory: Press MEMORY button to scroll through stored readings.
2. Average value: Displays average of last 3 measurements for current user.
3. Clear memory: To delete all readings for current user, press and hold MEMORY while in memory mode until "CLr" appears.
4. User selection: Press MEMORY briefly from ready screen to switch between User 1 and User 2.

Note: Memory full indicator appears when 99 measurements stored. Oldest reading is overwritten by new one.

Understanding Results

WHO classification colors on display:

Irregular Heartbeat Symbol: Appears if irregular heartbeat detected during measurement. Consult physician if symbol appears frequently.

Care & Maintenance

Clean device with soft, dry cloth only. Do not immerse in water or use chemicals.

1. Remove batteries if device not used for extended period.
2. Store in cool, dry place away from direct sunlight.
3. Do not expose to extreme temperatures or humidity.
4. Clean cuff with damp cloth if necessary; do not machine wash.
5. Check cuff periodically for wear or damage.

CAUTION! Do not disassemble device. No user-serviceable parts inside.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Inflation: Automatic
• Deflation: Automatic with pressure release valve
• Memory: 2 users x 99 measurements
• Power Supply: 4 x 1.5V AA batteries or 6V DC adapter
• Battery Life: Approximately 500 measurements
• Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
• Weight: Approximately 300g (without batteries)
• Operating Conditions: 10°C to 40°C, 15% to 90% RH

Troubleshooting

Reset: Remove batteries for 1 minute to reset device.

Service: For technical support, contact Microlife customer service at 1-800-xxx-xxxx or visit www.microlife.com