Microlife BPB1 Standard Blood Pressure Monitor User Manual

The Microlife BPB1 Standard is an automatic upper arm blood pressure monitor designed for home use. It features one-touch operation, a large LCD display, irregular heartbeat detection, 30 memory slots, WHO blood pressure classification indicator, and an adjustable cuff for arm circumferences 22-32 cm. Powered by 4 AA batteries or optional AC adapter. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, adjustable upper arm cuff, air tube, 4 AA batteries, instruction manual, and storage case.

Safety Information

Read all instructions before use. For accurate measurements and safety:

1. Consult your physician before starting blood pressure monitoring.
2. Do not use on infants, children, or persons unable to operate the device.
3. Do not use during physical activity or immediately after exercise.
4. Ensure cuff is properly positioned on bare upper arm.
5. Remain still and quiet during measurement.

WARNING! This device is for home use only, not for professional medical diagnosis. If readings are consistently abnormal, consult your physician.

Package Contents

• Microlife BPB1 Blood Pressure Monitor (main unit)
• Adjustable upper arm cuff
• Air tube (pre-connected)
• 4 x AA batteries
• Instruction manual
• Storage case
• Warranty card

Note: Check all items upon unpacking. Contact retailer if anything is missing or damaged.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-199 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 30 measurements with date and time
• Cuff Size: 22-32 cm (9-13 inches) arm circumference
• Display: LCD with backlight
• Power Supply: 4 x 1.5V AA batteries or DC 6V adapter
• Battery Life: Approximately 500 measurements
• Automatic Shut-off: After 1 minute of inactivity
• Operating Conditions: 10°C to 40°C, 15% to 90% humidity
• Storage Conditions: -20°C to 60°C, 10% to 95% humidity

Device Overview

Front Panel: START/STOP button, MEMORY button, SET button, LCD display.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, WHO indicator, Irregular heartbeat symbol, Battery indicator, Memory indicator, Error symbol, Date/Time.

Side/Back: Cuff connector, AC adapter port (optional), Battery compartment.

Cuff: Velcro closure, artery marker, metal D-ring, air tube connector.

Initial Setup

1. Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set Date and Time: Press SET button, use START to adjust values, press SET to confirm.
3. Cuff Preparation: Ensure cuff is completely deflated and tube is securely connected.
4. Positioning: Sit quietly for 5 minutes before first measurement.

Tip: For most accurate results, take measurements at the same time each day.

Taking a Measurement

1. Sit comfortably with back supported and feet flat on floor.
2. Rest arm on table with palm up, cuff at heart level.
3. Wrap cuff snugly around bare upper arm, 2-3 cm above elbow.
4. Align artery marker with brachial artery on inner arm.
5. Press START button. Device will inflate automatically.
6. Remain still and quiet during measurement.
7. Results display with systolic, diastolic, and pulse readings.
8. WHO indicator shows color zone (green=yellow=orange=red).
9. If irregular heartbeat detected, symbol appears.
10. Device deflates completely and shuts off after 1 minute.

CAUTION! Do not inflate cuff when not wrapped around arm. Do not move or talk during measurement.

Memory Function

Viewing Memory: Press MEMORY button to scroll through stored measurements. Display shows reading number, systolic/diastolic values, pulse, date, and time.

Clearing Memory: Hold MEMORY button for 3 seconds until "CLr" appears. All memory slots will be erased.

Memory Full: When 30 slots are full, oldest reading is automatically overwritten.

Care & Maintenance

1. Clean cuff with damp cloth and mild detergent. Do not immerse in water.
2. Clean monitor with dry soft cloth. Do not use solvents or abrasives.
3. Store in provided case in cool, dry place away from direct sunlight.
4. Remove batteries if not using for extended period (more than 3 months).
5. Replace batteries when low battery symbol appears.
6. Do not disassemble or attempt repairs.

CAUTION! Do not wash cuff in washing machine. Do not expose to extreme temperatures or humidity.

Regulatory Information

This device complies with MDD 93/42/EEC for medical devices. CE marked. Manufactured under ISO 13485 quality standards. FDA cleared (K number). Microlife is a registered trademark. For accuracy verification, recalibrate every 2 years at authorized service center. Disposal: Follow local regulations for electronic waste and batteries.

Troubleshooting

Service: For repairs or calibration, contact authorized Microlife service center. Do not attempt self-repair.

Support: Microlife Customer Service: 1-800-xxx-xxxx, www.microlife.com