Microlife Deluxe BPM3 Blood Pressure Monitor User Manual

The Microlife Deluxe BPM3 is an automatic upper-arm blood pressure monitor featuring Microlife's patented AFIB detection technology, a large LCD display with backlight, memory storage for multiple users, irregular heartbeat detection, WHO hypertension indicator, date/time function, and automatic inflation with adjustable cuff positioning. It is designed for easy, accurate home blood pressure monitoring. Below are key sections for safety, features, setup, operation, and maintenance.

Features at a Glance

Key components: Main unit with LCD display, adjustable arm cuff, air tube, 4xAA batteries, storage case, and instruction manual.

Safety Information

Read all instructions before use. For accurate measurements and safe operation.

1. Do not use on infants, young children, or persons unable to express themselves.
2. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use the device on an injured or sore arm.
4. Do not use while connected to other electronic medical equipment.
5. Keep the device away from children and pets.

WARNING! This device is for home use only and is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

Package Contents

Unpack and verify all components are present.

• Microlife BPM3 Monitor: 1 unit
• Adjustable Arm Cuff: 1 piece (22-42 cm)
• Air Tube: 1 piece (pre-connected)
• 4xAA Batteries: 1 set
• Storage Case: 1 piece
• Instruction Manual: 1 copy
• Quick Start Guide: 1 copy

CAUTION! Do not use if any components are damaged or missing. Contact customer service for replacements.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER button, LCD display. Cuff: Velcro closure, artery marker, air tube connector.

Display Symbols: User indicator (1/2), memory full, battery low, irregular heartbeat, AFIB detection, WHO color bar, systolic/diastolic readings, pulse rate, date/time.

Controls: START/STOP (begin/stop measurement), MEMORY (review stored readings), USER (switch between user 1 and 2).

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4xAA batteries observing correct polarity.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust values.
3. Select user: Press USER button to select User 1 or User 2 (indicator appears on display).
4. Apply cuff: Wrap cuff on bare upper arm, align artery marker with brachial artery, secure with Velcro.

Tip: Rest for 5 minutes before first measurement. Avoid eating, drinking caffeine, or smoking 30 minutes prior.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably: Keep feet flat, back supported, arm resting on table at heart level.
2. Apply cuff: Position cuff 1-2 cm above elbow, tighten snugly but not too tight.
3. Start measurement: Press START/STOP button. Cuff will inflate automatically.
4. Remain still: Do not talk or move during measurement.
5. Read results: Systolic, diastolic, and pulse appear on display with WHO indicator.
6. Store reading: Measurement is automatically stored for selected user.
7. Remove cuff: After measurement completes and cuff deflates, remove from arm.

WARNING! Do not inflate cuff when not attached to arm. Avoid taking measurements more than 3 times in succession.

Memory Function

Stores 60 readings for each of 2 users.

1. Review memory: Press MEMORY button to scroll through stored readings (date/time displayed).
2. Switch users: Press USER button to toggle between User 1 and User 2 memory.
3. Clear memory: To delete all readings for current user, press and hold MEMORY for 5 seconds until display clears.
4. Memory full: When memory is full, oldest reading is automatically overwritten.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Understanding Results

Interpret your blood pressure readings.

Symbols: Irregular heartbeat symbol appears if irregular rhythm detected. AFIB symbol appears if atrial fibrillation suspected. Consult physician if these symbols appear frequently.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

1. Clean device: Wipe with soft, dry cloth. Do not use solvents or immerse in water.
2. Store properly: Keep in storage case in cool, dry place away from direct sunlight.
3. Handle cuff carefully: Avoid twisting or kinking air tube. Do not wash cuff.
4. Replace batteries: When battery symbol appears, replace all 4 batteries promptly.
5. Check accuracy: Have device checked annually by authorized service center.

CAUTION! Do not disassemble or attempt repairs. Contact authorized service for maintenance.

Technical Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-199 beats per minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 2 users x 60 readings
• Cuff Size: 22-42 cm (8.7-16.5 inches)
• Power Supply: 4xAA batteries or 6V DC adapter (optional)
• Battery Life: Approximately 500 measurements
• Operating Conditions: 10°C to 40°C, 15% to 90% humidity
• Dimensions: 128 x 102 x 58 mm (main unit)
• Weight: 350 g (without batteries)

Troubleshooting

Reset: Remove batteries for 3 minutes, then reinsert to reset device.

Service: For technical support, contact Microlife Customer Service at 1-800-566-3456 or visit www.microlife.com.