Microlife RITE AID BP3KT1-4B Blood Pressure Monitor User Manual

The Microlife RITE AID BP3KT1-4B is an automatic upper arm blood pressure monitor designed for home use. It features one-touch operation, a large LCD display, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, and a comfortable D-ring cuff. This manual covers safety information, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with D-ring, AC adapter port, Battery compartment, START/STOP button.

Safety Information

Read all instructions before use. For accurate measurements, follow guidelines.

1. Consult your physician before using if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
2. Do not use on infants, children, or persons unable to express themselves.
3. Do not use while mobile phone or other electronic devices are in use nearby.
4. Do not inflate cuff when not wrapped around arm.
5. Keep device away from children.

WARNING! This device is for home use only, not for professional medical diagnosis. Measurements may be affected by movement, talking, or irregular heartbeat.

Package Contents

Unpack and verify all items are present.

• Microlife BP3KT1-4B Monitor (1 unit)
• Arm Cuff with D-ring (22-32 cm) (1 unit)
• Instruction Manual (this document)
• Quick Start Guide (1 sheet)
• AC Adapter (model specific, if included)
• Storage Case (1 unit)

Note: Batteries (4 x AA) may need to be purchased separately unless specified.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 60 measurements (30 for each of 2 users)
• Cuff Size: 22-32 cm (upper arm circumference)
• Power Supply: 4 x 1.5V AA batteries or AC adapter (6V DC)
• Display: LCD with backlight
• Automatic Shut-off: Approx. 1 minute after last operation
• Operating Conditions: 10°C to 40°C, 15% to 90% RH (non-condensing)
• Storage Conditions: -20°C to 60°C, ≤ 93% RH

Device Overview

Front Panel: LCD display, START/STOP button. Side: AC adapter port. Rear: Battery compartment, cuff tube connector.

Display Symbols: User 1/2 icon, Memory symbol, Battery indicator, Irregular heartbeat symbol, Hypertension stage indicator (color bars), Systolic/Diastolic values, Pulse rate, Date/Time, Average value icon.

Cuff: Arrow marking (align with artery), D-ring for secure fastening, Velcro closure, air tube connector.

Initial Setup

Before first use, install batteries or connect AC adapter, set date/time, and select user.

1. Insert Batteries: Open battery compartment on back, insert 4 AA batteries observing polarity.
2. Set Date/Time: Press and hold START/STOP button for 3 seconds. Use START/STOP to adjust values, wait 5 seconds to confirm.
3. Select User: Press the USER button (next to START/STOP) to toggle between User 1 and User 2.
4. Apply Cuff: Wrap cuff on bare upper arm, 1-2 cm above elbow. Arrow should point to artery. Secure with D-ring.

Tip: Rest for 5 minutes before first measurement. Sit comfortably with feet flat on floor.

Taking a Measurement

For accurate results, remain still and quiet during measurement.

1. Sit comfortably with back supported, feet flat.
2. Wrap cuff correctly on left arm (unless instructed otherwise by physician).
3. Rest arm on table so cuff is at heart level.
4. Press START/STOP button. Cuff will inflate automatically.
5. Remain still until measurement is complete and cuff deflates.
6. Read results on display. Systolic, diastolic, and pulse will show.
7. Results are automatically stored in memory for selected user.
8. Device will power off automatically after 1 minute.

Note: If irregular heartbeat symbol appears, measurement may be less accurate. Repeat after resting 5 minutes.

Memory Function

View stored readings and calculate averages.

1. To recall memory: Press and release the USER button (do not hold).
2. Most recent reading for selected user displays first.
3. Press USER button again to scroll through previous readings (up to 30 per user).
4. Average value: After 3 readings taken within 10 minutes, the average icon appears and the display shows the average of the last 3 measurements.
5. To clear memory: Remove batteries for 1 minute. All stored data will be erased.

Tip: Record readings in a log for doctor visits.

Care & Maintenance

Handle device with care to ensure longevity.

• Clean cuff with a damp cloth and mild detergent. Do not immerse in water.
• Clean monitor with dry, soft cloth. Do not use solvents.
• Store in provided case in a cool, dry place.
• Remove batteries if device will not be used for extended period.
• Do not expose to extreme temperatures, humidity, dust, or direct sunlight.
• Do not drop or subject to strong shocks.

CAUTION! Do not attempt to repair device yourself. Contact authorized service.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. This device meets the requirements of EN 1060-4:2004 (non-invasive blood pressure monitors). Manufactured for RITE AID. Microlife is a registered trademark. For support, visit www.microlife.com or contact RITE AID customer service.

Troubleshooting

Reset: Remove batteries for 1 minute to reset device and clear memory.

Service: For repairs, contact RITE AID or authorized Microlife service center. Do not disassemble.