Microlife Watch BP 03 Blood Pressure Monitor User Manual

The Microlife Watch BP 03 is a clinically validated wrist blood pressure monitor designed for convenient and accurate home monitoring. It features one-touch operation, a large LCD display, irregular heartbeat detection, 60 memory slots with date and time stamp, WHO blood pressure classification indicator, and an adjustable cuff. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with integrated cuff, LCD display, START/STOP button, Memory button, Date/Time button, Battery compartment.

Safety Information

Read all instructions before use. For safe and accurate measurements.

1. Do not use on infants, children, or persons who cannot express themselves.
2. Consult your physician before use if you have arrhythmia, blood circulation problems, or other serious conditions.
3. Do not use the device on a wounded or sore wrist.
4. Do not modify or disassemble the device.
5. Keep the device away from strong electromagnetic fields (e.g., mobile phones, microwave ovens).

WARNING! This device is for home use only and is not a substitute for professional medical diagnosis. Always follow your doctor's instructions.

Package Contents

Unpack and verify all items are present.

• Microlife Watch BP 03 Blood Pressure Monitor (main unit with integrated cuff)
• Storage Case
• 2 x AAA Batteries
• User Manual (this document)
• Warranty Card

CAUTION! If any item is missing or damaged, do not use the device. Contact your retailer or Microlife.

Device Overview

Familiarize yourself with the device components.

Front: LCD Display, START/STOP Button.

Side: Memory (M) Button, Date/Time (D/T) Button.

Bottom: Battery Compartment Cover.

Cuff: Integrated, with velcro closure and positioning mark.

Display Symbols: Systolic/Diastolic Pressure, Pulse Rate, Irregular Heartbeat Symbol, WHO Indicator Bar, Memory Icon, Low Battery Icon, Error Symbol.

First-Time Setup

Prepare the device for first use.

1. Insert Batteries: Open battery compartment, insert 2 AAA batteries observing polarity, close cover.
2. Set Date and Time: Press and hold the D/T button. Use START/STOP to adjust values. Press D/T to confirm.
3. Apply the Cuff: Place cuff on left wrist (recommended) with display facing upward. Position cuff 1-2 cm from hand. Secure snugly with velcro.
4. Positioning: Rest arm on a table so the cuff is at heart level. Relax for 5 minutes before first measurement.

Tip: For most accurate results, measure at the same time each day, before meals or medication.

Taking a Measurement

Follow these steps for a proper reading.

1. Sit comfortably with back supported and feet flat on the floor.
2. Apply the cuff correctly as described in First-Time Setup.
3. Press the START/STOP button. The cuff will inflate automatically.
4. Remain still and quiet during inflation and measurement. Do not move your arm or hand.
5. The cuff will deflate automatically. Your systolic pressure, diastolic pressure, and pulse rate will display.
6. The measurement is stored automatically in memory.
7. To turn the device off, press START/STOP again, or it will power off automatically after 1 minute.

WARNING! Do not inflate the cuff when it is not wrapped around your wrist. Avoid taking measurements immediately after exercise, bathing, eating, or consuming caffeine/alcohol.

Understanding Results

Interpreting the display and WHO classification.

Note: A single high reading is not necessarily a cause for concern. Track your readings over time and consult your physician with any concerns.

Memory Function

Reviewing and managing stored readings.

1. View Memory: Press the Memory (M) button. The most recent reading appears.
2. Scroll: Press M again to scroll through all 60 memory slots in reverse chronological order (newest to oldest).
3. Each reading shows: Measurement number, systolic/diastolic values, pulse rate, date, and time.
4. Clear Memory: To delete all memory, press and hold the M button for more than 3 seconds while in memory mode. "CLr" will flash, then all data will be erased.

Tip: Use the memory function to track your blood pressure trends for discussions with your doctor.

Battery & Power

• Battery Type: 2 x AAA (1.5V) alkaline batteries.
• Battery Life: Approximately 300 measurements.
• Low Battery Indicator: A battery icon flashes on the display when power is low.
• Replacing Batteries: Open battery compartment, remove old batteries, insert new ones with correct polarity (+/-).
• Automatic Shut-off: Device turns off after 1 minute of inactivity to save power.

CAUTION! Use only recommended battery type. Remove batteries if the device will not be used for an extended period. Do not mix old and new batteries.

Care & Cleaning

Remove batteries before cleaning. Clean only with a soft, slightly damp cloth. Do not immerse in water or use abrasive cleaners, solvents, or sprays.

Storage: Store in the provided case in a cool, dry place away from direct sunlight, extreme temperatures, and dust.

CAUTION! Never wash the cuff in a washing machine. Do not attempt to repair the device yourself.

Troubleshooting

Reset: Remove batteries for 1 minute to perform a full reset.

Service: For technical support or service, visit www.microlife.com or contact your local Microlife distributor. Do not open the device.