Microlife WatchBP office Target Blood Pressure Monitor User Manual

The Microlife WatchBP office Target is a professional-grade blood pressure monitor designed for clinical and office use. It features advanced oscillometric technology, automatic inflation, irregular heartbeat detection, body movement detection, large memory storage, multi-user support, data transfer capabilities, and a clear LCD display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Universal Cuff, AC Adapter, USB cable, Quick Start Guide, Software CD.

Safety Information

Read all instructions before use. For professional use only.

1. Do not use on infants, children, or persons unable to express their consent.
2. Consult physician for proper cuff size if arm circumference is outside 22-42 cm range.
3. Do not use on injured or sore arm, or on arm with intravenous infusion or shunt.
4. Wait at least 5 minutes between consecutive measurements on the same person.
5. Do not use in presence of flammable gases.

WARNING! This device is not intended for self-diagnosis or treatment. Always consult a healthcare professional for interpretation of results.

Device Components

Identify all parts before setup.

1. Main Unit: Contains display, control buttons, and internal pump.
2. Universal Cuff: With Velcro closure and air tube connector.
3. AC Adapter: For mains power operation.
4. USB Cable: For data transfer to computer.
5. Quick Start Guide: Basic operating instructions.
6. Software CD: Contains WatchBP Office software for data management.

CAUTION! Use only Microlife-approved accessories. Third-party accessories may affect accuracy.

Specifications

• Measurement Method: Oscillometric.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min.
• Cuff Size: Universal cuff 22-42 cm arm circumference.
• Memory: Up to 99 measurements per user, 4 user slots.
• Power Supply: AC adapter (input: 100-240V AC, 50/60Hz) or 4xAA batteries.
• Display: LCD with backlight.
• Interface: USB 2.0.
• Dimensions: Main unit: 150 x 100 x 50 mm (approx).
• Weight: Approximately 400g (without batteries).
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: ≤85% RH.

Initial Setup

Prepare device for first use.

1. Insert batteries or connect AC adapter to power outlet and device.
2. Connect cuff tube to the air socket on the main unit until it clicks.
3. Power on device using the START/STOP button.
4. Set date and time using the SET button and arrow keys.
5. Install WatchBP Office software on PC from provided CD.
6. Connect device to PC via USB cable for initial synchronization.

Tip: For most accurate results, use AC power in clinical settings. Batteries are for portable use.

Taking a Measurement

Follow proper procedure for accurate results.

1. Have patient sit quietly for 5 minutes before measurement.
2. Apply cuff to bare upper arm 1-2 cm above elbow. Center artery marker over brachial artery.
3. Secure cuff snugly but not too tight (should fit one finger underneath).
4. Rest arm on table with cuff at heart level.
5. Press START/STOP button to begin automatic inflation and measurement.
6. Remain still and quiet during measurement.
7. View results on display: Systolic, Diastolic, Pulse, and any detection icons.
8. Press MEMORY button to save measurement to selected user slot.

WARNING! Do not move or talk during measurement. Incorrect cuff placement affects accuracy.

Memory and Data Management

Store and review measurements.

1. Select user (U1-U4) before measurement using USER button.
2. Saved measurements include: systolic, diastolic, pulse, date, time, and any detection flags.
3. Press MEMORY button to review stored measurements for current user.
4. Use arrow buttons to scroll through memory.
5. Press and hold MEMORY button for 3 seconds to delete all measurements for current user.
6. For long-term storage and analysis, transfer data to PC using WatchBP Office software.

Note: Memory is maintained when changing batteries if done within 2 minutes.

Connecting to PC/Software

Transfer data for analysis and reporting.

1. Install WatchBP Office software from provided CD.
2. Connect device to PC USB port using provided cable.
3. Open WatchBP Office software on PC.
4. Press DATA button on device to initiate transfer.
5. Follow on-screen instructions to import measurements.
6. Use software to generate reports, track trends, and export data.

Tip: Ensure device drivers are installed (automatic with software installation).

Care & Maintenance

Keep device clean and functioning properly.

1. Clean cuff with mild soap and damp cloth. Do not immerse in water.
2. Wipe main unit with dry or slightly damp cloth.
3. Do not use alcohol, solvents, or abrasive cleaners.
4. Store device in clean, dry place at room temperature.
5. Replace batteries when low battery icon appears.
6. Inspect cuff regularly for wear, tears, or loose stitching.
7. Have device calibrated annually by authorized service center.

CAUTION! Do not autoclave or sterilize any part of the device. Do not expose to extreme temperatures or humidity.

Regulatory Information

CE marked: Conforms to European Medical Device Directive 93/42/EEC. FDA cleared: For professional use. Manufactured by Microlife AG, Espenstrasse 139, 9443 Widnau, Switzerland. Copyright © Microlife. For support, visit www.microlife.com or contact your local distributor.

Troubleshooting

Reset: Remove batteries and AC adapter for 2 minutes to reset device.

Service: Contact authorized Microlife service center. Do not attempt to repair device yourself.